I got the Blade 1000 today. Many thanks to those who made this
possible, especially Bret, who got the ball rolling. This should help
me finish the work of getting UltraSPARC-III running at full speed.
I just installed the latest snapshot on it, so you all can see what
you got me.
Thanks again,
Mark
console is /[EMAIL PROTECTED],700000/[EMAIL PROTECTED]/[EMAIL
PROTECTED],400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.0-current (GENERIC) #991: Tue Nov 7 09:16:13 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969687040
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],600000/SUNW,[EMAIL PROTECTED],0/[EMAIL
PROTECTED],0/[EMAIL PROTECTED],0
mainbus0 (root): SUNW,Sun-Blade-1000 (UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III @ 750 MHz, version 0 FPU
cpu0: physical 128K instruction (32 b/l), 256K data (32 b/l), 8192K external
(512 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: "Schizo", ign 200, bus B 0 to 0
schizo0: dvma map ff800000-ffffdfff, iotdb 4d18000-4d1a000
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun PCIO Ebus2 (US III)" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ipl 35
iic0 at pcfiic0
"at24c64" at iic0 addr 0x50 not configured
"at24c64" at iic0 addr 0xd0 not configured
"at24c64" at iic0 addr 0xd2 not configured
"at24c64" at iic0 addr 0xd4 not configured
"at24c64" at iic0 addr 0xd6 not configured
"bbc" at ebus0 addr 0-fffff not configured
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic1 at ebus0 addr 30-31 ipl 35
iic1 at pcfiic1
"at24c64" at iic1 addr 0x50 not configured
admtemp0 at iic1 addr 0x18: max1617
"tda8444" at iic1 addr 0x24 not configured
"scm001" at iic1 addr 0x20 not configured
"at24c64" at iic1 addr 0x54 not configured
"firei" at iic1 addr 0x30 not configured
"beep" at ebus0 addr 32-37 not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 32 ipl 33: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ipl 36: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
"pmc" at ebus0 addr 300700-300701 not configured
"floppy" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 37 not
configured
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ipl 28: polled
sab0 at ebus0 addr 400000-40007f ipl 34: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d, address
00:03:ba:02:91:61
luphy0 at gem0 phy 0: LU6612 10/100 PHY, rev. 1
luphy1 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
using external phy
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Sun OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec 0x218,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 2395> SCSI2 5/cdrom
removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec 0x219,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets
schizo1 at mainbus0: "Schizo", ign 200, bus A 0 to 0
schizo1: dvma map ff800000-ffffdfff, iotdb 4fa6000-4fa8000
pci1 at schizo1
isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
isp0: invalid NVRAM header
scsibus2 at isp0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <SEAGATE, ST318304FSUN18G, 0726> SCSI3 0/direct
fixed
sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total
upa0 at mainbus0
creator0 at upa0: Creator3D, model SUNW,501-4788, dac 10
wsdisplay0 at creator0
wsdisplay0: screen 0 added (std, sun emulation)
ppm at mainbus0 not configured
pcons at mainbus0 not configured
No counter-timer -- using %tick at 750MHz as system clock.
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
