I'm having the same issue with 4.0 -stable--well, a bastardized copy of
-stable that also contains ral, cardbus and related changes from
-current. I've used more than one fxp card as well as more than one ral
card and the issue stays the same--fxp0: warnings and timeouts and,
eventually under load or after a few days, the box locks up with no
apparent panic and ddb.console=1 provides no help. If I recall
correctly, the issue also exists if I replace fxp with xl. It would
appear so long as there are two Cardbus cards in this box, this issue
occurs--as fxp plus wi is rock solid.
How do I troubleshoot this further?
$ dmesg
OpenBSD 4.0-stable (GENERIC) #0: Thu Nov 2 21:41:33 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 647 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 133656576 (130524K)
avail mem = 114528256 (111844K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99, SMBIOS rev. 2.3 @
0x7ff0000 (45 entries)
bios0: TOSHIBA SATELLITE PRO 4340XDVD
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 1:39 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0402H>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1317> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 7 function 0 not configured
vendor "Toshiba", unknown product 0x0d01 (class wireless subclass IrDA,
rev 0x00) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC95B CardBus" rev 0x07: irq
11
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC95B CardBus" rev 0x07: irq
11
yds0 at pci0 dev 12 function 0 "Yamaha 744" rev 0x02: irq 11
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
biomask ef65 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
fxp0 at cardbus0 dev 0 function 0 "INTEL(R), PRO/100 CARDBUS II,
MBLA3300": INTEL(R) PRO/100 CARDBUS II: irq 11, address
00:a0:c9:bc:ad:ad
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500,
802.11 CardBus Reference Card": irq 11, address 00:0e:3b:07:a2:13
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AKM 3D
audio0 at yds0
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
Melameth, Daniel D. wrote:
> I recently upgraded (via clean install) a machine that was previously
> running 3.8 and wi in hostap, without incident for the last six months
> or so, to 3.9 running ral in hostap. While all other hardware on the
> system has remained unchanged, the box has locked up five times in the
> last five days at various times. Basically, everything freezes, no
> response to pings, and there is no apparent panic--just a blinking
> cursor on an unresponsive monitor after the login prompt. The system
> appears to lockup when moving a larger amount of traffic than usual,
> but I'm not certain, and, while this does not occur just prior to the
> freeze, one thing I've noticed that didn't occur before the upgrade is
> the following making its way occasionally into /var/log/messages:
>
> May 10 07:21:57 meth /bsd: fxp0: warning: SCB timed out
> May 10 07:22:09 meth last message repeated 60 times
> May 10 07:22:14 meth /bsd: fxp0: device timeout
>
> Any thoughts on how to proceed (outside of possibly replacing "known
> good" hardware)?
>
> Thanks.
>
>
> $ dmesg
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 647 MHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
> XSR,SSE
> real mem = 133668864 (130536K)
> avail mem = 115249152 (112548K)
> using 1657 buffers containing 6787072 bytes (6628K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high, estimated 1:50 hours
> apm0: flags 20102 dobusy 0 doidle 1
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc0000/0xc000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0402H>
> wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1317> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x03: SMI
> iic0 at piixpm0
> admtemp0 at iic0 addr 0x4e: adm1021
> "AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 7 function 0 not configured
> vendor "Toshiba", unknown product 0x0d01 (class wireless subclass
> IrDA, rev 0x00) at pci0 dev 9 function 0 not configured
> cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC95B CardBus" rev 0x07:
> irq 11
> cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC95B CardBus" rev 0x07:
> irq 11
> yds0 at pci0 dev 12 function 0 "Yamaha 744" rev 0x02: irq 11
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> biomask ef65 netmask ef65 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> fxp0 at cardbus0 dev 0 function 0 "INTEL(R), PRO/100 CARDBUS II,
> MBLA3300": INTEL(R) PRO/100 CARDBUS II: irq 11, address
> 00:03:47:18:1f:5d
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500,
> 802.11 CardBus Reference Card": irq 11, address 00:0e:3b:07:a2:13
> ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
> ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AKM 3D
> audio0 at yds0
> opl0 at yds0: model OPL3
> midi1 at opl0: <DS-1 integrated Yamaha OPL3>
> mpu at yds0 not configured
> mpu at yds0 not configured
> mpu at yds0 not configured
> mpu at yds0 not configured
> pppoe0: phase establish
> pppoe0: phase authenticate
> pppoe0: phase network
