hello
i try to set up an openbsd4.0 workstation and ran into problems with
the audio/sound setup.
i followed the 'multimedia-faq' but the audio-output is in case of
*.au files somehow 'crippeld' and in the case of
audio-cds (playing with cdio) there is no output at all.
can you give me a hint?
thanks
thomas
stripped down dmesg
"Intel 82801CA/CAM AC97" rev 0x01 at pci0 dev 31 function 5 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq 9,
ICH3 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
auich0: measured ac97 link rate at 47994 Hz, will use 48000 Hz
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq 9,
ICH3 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audioctl:
name=ICH3 AC97
version=0x01
config=auich0
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,mmap,independent
full_duplex=0
fullduplex=0
blocksize=4096
hiwat=10
lowat=1
monitor_gain=0
mode=
play.rate=44100
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=40960
play.samples=4616192
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=44100
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
mixerctl:
outputs.master=103,103
outputs.master.mute=off
outputs.mono=255
outputs.mono.mute=off
outputs.mono.source=mixerout
outputs.headphones=255,255
outputs.headphones.mute=off
outputs.bass=255
outputs.treble=255
inputs.speaker=255
inputs.speaker.mute=off
inputs.phone=191
inputs.phone.mute=off
inputs.mic=191
inputs.mic.mute=off
inputs.mic.preamp=off
inputs.mic.source=mic0
inputs.line=191,191
inputs.line.mute=off
inputs.cd=191,191
inputs.cd.mute=off
inputs.video=191,191
inputs.video.mute=off
inputs.aux=191,191
inputs.aux.mute=off
inputs.dac=191,191
inputs.dac.mute=off
record.source=mic
record.volume=255,255
record.volume.mute=off
record.mic=0
record.mic.mute=off
outputs.loudness=off
outputs.spatial=off
outputs.spatial.center=0
outputs.spatial.depth=0
outputs.surround=255,255
outputs.surround.mute=off
outputs.center=255
outputs.center.mute=off
outputs.lfe=255
outputs.lfe.mute=off
outputs.extamp=off
attachment:
full dmesg
OpenBSD 4.0 (RAMDISK_CD) #39: Sat Sep 16 19:34:26 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) III Mobile CPU 933MHz ("GenuineIntel" 686-class) 929
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 401629184 (392216K)
avail mem = 359628800 (351200K)
using 4256 buffers containing 20185088 bytes (19712K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(35) BIOS, date 08/09/01, BIOS32 rev. 0 @ 0xfd870,
SMBIOS rev. 2.31 @ 0xd8010 (16 entries)
bios0: Sony Corporation PCG-GR114MK(DE)
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd870/0x790
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01pci_intr_map:
no mapping for pin C
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
"TI TSB43AA22 FireWire" rev 0x02 at pci2 dev 2 function 0 not configured
cbb0 at pci2 dev 5 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 3
cbb1 at pci2 dev 5 function 1 "Ricoh 5C476 CardBus" rev 0x80pci_intr_map: no
mapping for pin B
: couldn't map interrupt
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq 9,
address 08:00:46:4b:b8:0d
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-20>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA710, 1.20> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
"Intel 82801CA/CAM AC97" rev 0x01 at pci0 dev 31 function 5 not configured
"Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2,
iclass 3/1
uhid at uhidev0 not configured
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 933MHz ("GenuineIntel" 686-class) 929
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 401629184 (392216K)
avail mem = 358158336 (349764K)
using 4256 buffers containing 20185088 bytes (19712K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(35) BIOS, date 08/09/01, BIOS32 rev. 0 @ 0xfd870,
SMBIOS rev. 2.31 @ 0xd8010 (16 entries)
bios0: Sony Corporation PCG-GR114MK(DE)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd870/0x790
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01pci_intr_map:
no mapping for pin C
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
"TI TSB43AA22 FireWire" rev 0x02 at pci2 dev 2 function 0 not configured
cbb0 at pci2 dev 5 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 3
cbb1 at pci2 dev 5 function 1 "Ricoh 5C476 CardBus" rev 0x80pci_intr_map: no
mapping for pin B
: couldn't map interrupt
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq 9,
address 08:00:46:4b:b8:0d
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-20>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA710, 1.20> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev
0x01pci_intr_map: no mapping for pin B
: polling
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq 9, ICH3
AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2,
iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 5 deleted
auich0: measured ac97 link rate at 47994 Hz, will use 48000 Hz
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 933MHz ("GenuineIntel" 686-class) 929
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 401629184 (392216K)
avail mem = 358158336 (349764K)
using 4256 buffers containing 20185088 bytes (19712K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(35) BIOS, date 08/09/01, BIOS32 rev. 0 @ 0xfd870,
SMBIOS rev. 2.31 @ 0xd8010 (16 entries)
bios0: Sony Corporation PCG-GR114MK(DE)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd870/0x790
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01pci_intr_map:
no mapping for pin C
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
"TI TSB43AA22 FireWire" rev 0x02 at pci2 dev 2 function 0 not configured
cbb0 at pci2 dev 5 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 3
cbb1 at pci2 dev 5 function 1 "Ricoh 5C476 CardBus" rev 0x80pci_intr_map: no
mapping for pin B
: couldn't map interrupt
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq 9,
address 08:00:46:4b:b8:0d
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-20>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA710, 1.20> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev
0x01pci_intr_map: no mapping for pin B
: polling
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq 9, ICH3
AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2,
iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
