I am looking for some feedback on this DMESG if possible.
I am playing with an old Sun T1 105 and does look like it work well, but
I never saw so many not configure message in a single DMESG.
Can anyone clue me in. Is that really normal, did I most likely forgot
something, etc.
That's my first time with this Sum hardware type, so I am not sure as to
what's normal or not.
Thanks
Daniel
Here the dmesg.
==============================
dmesg console is /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL
PROTECTED]/[EMAIL PROTECTED],3803f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.0 (GENERIC) #953: Sun Sep 17 00:56:22 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969629696
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL
PROTECTED],0
mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.039 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff, iotdb 5366000-53e6000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ipl 37
"SUNW,pll" at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34:
polled
"fdthree" at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl
39 not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
"watchdog" at ebus0 addr 200000-20003f ipl 4 not configured
"display7seg" at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
"flashprom" at ebus0 addr 400000-5fffff not configured
"flashprom" at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ipl 40
iic0 at pcfiic0
pcfadc0 at iic0 addr 0x4f
"i2cpcf,8574a" at iic0 addr 0x38 not configured
"i2cpcf,8574a" at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ipl 27
iic1 at pcfiic1
"SUNW,lom" at ebus0 addr 400000-400063 not configured
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:f9:b7:98
luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec
0x7e0, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAG3182L SUN18G, 1111> SCSI2
0/direct fixed
sd0: 17274MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sec, 35378533 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM, DDRS39130SUN9.0G, S98E> SCSI2
0/direct fixed
sd1: 8637MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sec, 17689267 sec total
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7da, address
08:00:20:f9:b7:99
luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03:
DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7c2 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1107> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
root on sd0a
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
siop0: target 1 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers
