Hello,
I re-tried to load the latest snapshot for amd64 (14/10/2006) but it
still fail to boot.
As in my previous message, it crashes after the DHCP request (no error message).
If I try to boot a second time, it says that / was not properly
unmounted, it marks the filesystem clean (only the first partition)
and crashes.
OpenBSD boots when I run bsd.rd or bsd.mp and the card seems to work
fine (I can download the snapshot).
Here is a dmesg from bsd.rd (snapshot 14/10/2006 for amd64) :
OpenBSD 4.0-current (RAMDISK_CD) #908: Fri Oct 13 01:28:11 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 536342525 (523772K)
avail mem = 448868352 (438348K)
using 13145 buffers containing 53841920 bytes (52580K) of memory
maisbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Celeron(R) CPU 2.53GHz, 2533.72 MHz
cpu0: FPU, VME, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR,
PGE, MCA, CMOV, PAT, PSE36, CFLUSH, DS, ACPI, MMX, FXSR, SSE, SSE2,
SS, HTT, TM, SBF, SSE3, NXE, LONG
cpu0: 256KB 64b/line 4-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x81
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at pbb1 bus 2
ppb2 at pci2 dev 1 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci3 at ppb2 bus 3
em0 at pci3 dev 4 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03
: irq 10, address 00:0e:0c:bb:53:08
em1 at pci3 dev 4 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03
: irq 5, address 00:0e:0c:bb:53:09
em2 at pci3 dev 6 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03
: irq 15, address 00:0e:0c:bb:53:0a
em3 at pci3 dev 6 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03
: irq 11, adress 00:0e:0c:bb:53:0b
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
vga1 at pci6 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1 : console (80x25, vt100 emulation)
"Intel 82801GB LPC" rev 0x01 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01 : DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0 : <QUANTUM FIREBALLlct15 07>
wd0: 16-sector PIO, LBA, 7162MB, 14668290 sectors
intr_established: pic pic0 pin 15: can't share type 3 with 2
pciide0: no compatibility interrupt for use by channel 1
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured"
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 : console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Can somebody explain me why the card works with bsd.mp and doesn't
work with bsd ?
Will this card work for the 4.0-release ?
Thank you.
