installing OpenBSD/armish on an n2100 I had to manually fdisk
as when I just used `fdisk -i' disklabel only saw 16383*1008-63
sectors free.
I don't know if this is indicative of a problem or whether
it's just information that might be useful to someone installing
but either way it's in the list archives now.
I haven't seen much in the way of power specs published for
these btw, with a 3.5" drive connected the included PSU
(12V 5A made by Seasonic) draws approx 15W (39VA) at idle,
18W (43VA) compiling. (and the soldering's pretty easy).
device: /dev/rwd0c
type: ESDI
disk: ESDI/IDE disk
label: ST3120811AS
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 234441648
free sectors: 16514001
rpm: 3600
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 234441648 0 unused 0 0
... (same after z, g d, and so on).
fdisk: 1> print
Disk: wd0 geometry: 16383/16/63 [234441648 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
*3: A6 0 1 1 - 232580 15 63 [ 63: 234441585 ] OpenBSD
fdisk: 1> edi 3
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*3: A6 0 1 1 - 16382 15 63 [ 63: 16514001 ] OpenBSD
Partition id ('0' to disable) [0 - FF]: [A6] (? for help)
Do you wish to edit in CHS mode? [n]
offset: [63]
size: [16514001] 234441585
(235551648-63 = 234441585)
OpenBSD/armish booting ...
initarm: Configuring system ...
physmemory: 32768 pages at 0xa0000000 -> 0xa7ffffff
kernelsize text 2a9df1 total 343570 end c04ff398esym c0543570
physical_freestart a0544000 end a8000000
[ using 279000 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.0-current (GENERIC) #57: Wed Oct 11 08:28:25 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/armish/compile/GENERIC
real mem = 134217728 (131072K) 128MB
avail mem = 115597312 (112888K)
using 1664 buffers containing 6815744 bytes (6656K) of memory
mainbus0 (root)
cpu0 at mainbus0: i80219 600MHz step A-0 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
iopxs0 at mainbus0: Thecus Nx100: i80321 I/O Processor
iopiic0 at iopxs0: I2C controller
iic0 at iopiic0
ricohrtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
pcaled0 at iic0 addr 0x60: PCA9532 LED controller
gpio0 at pcaled0: 16 pins
fintek0 at iic0 addr 0x2e: F75375 rev 1.5
pci0 at iopxs0
re0 at pci0 dev 1 function 0 "Realtek 8169" rev 0x10: irq 27, address
00:14:fd:10:3e:3c
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
re1 at pci0 dev 2 function 0 "Realtek 8169" rev 0x10: irq 30, address
00:14:fd:10:3e:3d
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
pciide0 at pci0 dev 3 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA
pciide0: using irq 29 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3120811AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
uhci0 at pci0 dev 4 function 0 "VIA VT83C572 USB" rev 0x61: irq 27
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 1 "VIA VT83C572 USB" rev 0x61: irq 27
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 4 function 2 "VIA VT6202 USB" rev 0x63: irq 29
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
gpio1 at iopxs0: 8 pins
obio0 at mainbus0
com0 at obio0 addr 0xfe800000 intr 28: ns16550a, 16 byte fifo
com0: console
clock: hz= 100 stathz = 100
boot device: wd0.
root on wd0a
rootdev=0x1000 rrootdev=0x1000 rawdev=0x1002
