On 11/10/06, Patrick Cummings <[EMAIL PROTECTED]> wrote:
Hi misc,
I'm trying to setup a new openbsd 3.9 install on i386. It worked before on
that computer when I installed quickly to test for compatibility, but I
needed to finish up some hardware stuff on it and then I wanted to install
for real but it does not work anymore.
It hangs at the disk: line
"Loading /3.9/I386/CDBOOT
probing: pc0 com0 apm mem[639K 382M a20=on]
disk:"
and then it stays there forever.
The computer has two storage controllers. One is an ami-compatible raid
controller. The other is the pciide-compatible sata sil3114 chip. Both
appear to be working.
If I unplug the scsi drives from the controller and leave the controller
in,
it will work.
Also if I unplug the sata drives and leave the controller in, it will
work.
However all appears to be working quite well as I can install win2000 on
it
and all drives work well. Also as I've said openbsd 3.9 worked on it just
a
few days ago, but I can't find what I've changed. I thought it might be a
bios settings problem so I played with the settings, but nothing seemed to
help.
Overall I think this makes no sense, what are some of the problems that
might be happening?
Can you boot from any of the install boot floppies?
If so, can you provide a dmesg?
Sure, I can get a dmesg if I use it with the two sata drives unplugged:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R,SSE
real mem = 402169856 (392744K)
avail mem = 359616512 (351188K)
using 4278 buffers containing 20209664 bytes (19736K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(71) BIOS, date 04/12/01, BIOS32 rev. 0 @ 0xfb1b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdbd4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb40/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11 15
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x2200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0xc4
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage 4" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.30> SCSI0 5/cdrom
removab le
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x16: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x16: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:02:44: 26:2f:12
rlphy0 at rl0 phy 0: RTL internal PHY
ami0 at pci0 dev 12 function 0 "AMI MegaRAID Series 428" rev 0x04: irq 11
AMI 42 8 32b
ami0: FW UF82, BIOS v1.66, 16MB RAM
ami0: 2 channels, 16 targets, 1 logical drives
scsibus1 at ami0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34730MB, 34730 cyl, 64 head, 32 sec, 512 bytes/sec, 71127040 sec total
pciide1 at pci0 dev 13 function 0 "CMD Technology SiI3114 SATA" rev 0x02:
DMA
pciide1: using irq 15 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask fbed netmask ffed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
