Hi,
I'm having a bit of trouble using kern.watchdog.period. Every time I
set it, my DELL 1850 turns off.
In two different SSH sessions, I did the following:
cefeu:2642:$ sysctl kern.watchdog
kern.watchdog.period=0
kern.watchdog.auto=1
cefeu:2644:$ sudo sysctl kern.watchdog.period=300
kern.watchdog.period: 0 -> 300
cefeu:2645:$
cefeu:2644:$ while : ; do echo "$(date +%H:%M:%S) $(sysctl
kern.watchdog.period)"; sleep 1 ; done
18:50:48 kern.watchdog.period=0
18:50:49 kern.watchdog.period=0
18:50:50 kern.watchdog.period=0
18:50:51 kern.watchdog.period=300
This period is measured in seconds, isn't it ?
dmesg follows:
OpenBSD 4.0-current (GENERIC.MP) #946: Wed Sep 27 15:01:46 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 3220537344 (3145056K)
avail mem = 2944221184 (2875216K)
using 4256 buffers containing 161128448 bytes (157352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/05, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf9920 (87 entries)
bios0: Dell Computer Corporation PowerEdge 1850
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb140/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x3c00 0xcf000/0x2200
0xd1800/0x600 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016C )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec83000, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 10
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 9 int 14 (irq 7)
ami0: Dell 16c, 32b, FW 513O, BIOS vH418, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2
3/processor fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x06
pci3 at ppb2 bus 3
fxp0 at pci3 dev 11 function 0 "Intel 8255x" rev 0x0d, i82550: apic 9
int 5 (irq 3), address 00:0e:0c:63:da:be
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 10 int 0 (irq 11), address 00:11:43:d2:ef:30
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05:
apic 10 int 1 (irq 3), address 00:11:43:d2:ef:31
ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic
8 int 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic
8 int 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic
8 int 18 (irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic
8 int 23 (irq 5)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
"Dell DRAC 4" rev 0x00 at pci9 dev 5 function 0 not configured
"Dell DRAC 4 Virtual UART" rev 0x00 at pci9 dev 5 function 1 not configured
"Dell DRAC 4 SMIC" rev 0x00 at pci9 dev 5 function 2 not configured
pciide0 at pci9 dev 6 function 0 "CMD Technology PCI0680" rev 0x02
pciide0: bus-master DMA support present
pciide0: channel 0 wired to native-PCI mode
pciide0: using apic 8 int 23 (irq 5) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
sd1 at scsibus2 targ 0 lun 0: <DELL, VSF, 0123> SCSI0 0/direct removable
sd1: drive offline
atapiscsi1 at pciide0 channel 0 drive 1
scsibus3 at atapiscsi1: 2 targets
cd0 at scsibus3 targ 0 lun 0: <DELL, VCD, 0133> SCSI0 5/cdrom removable
sd1(pciide0:0:0): using PIO mode 3
cd0(pciide0:0:1): using PIO mode 3
pciide0: channel 1 wired to native-PCI mode
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi2 at pciide1 channel 0 drive 0
scsibus4 at atapiscsi2: 2 targets
cd1 at scsibus4 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction translators
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
WARNING: R/W mount of /var/squid/cache1 denied. Filesystem is not
clean - run fsck
carp: pfsync0 demoted group carp to 129
WARNING: R/W mount of /var/squid/cache1 denied. Filesystem is not
clean - run fsck
em0: watchdog timeout -- resetting
carp: carp0 demoted group carp to 130
carp: carp0 demoted group carp to 129
carp: pfsync0 demoted group carp to 128
--
Fernando M. Braga
