I am in the process of installing OpenBSD/3.9-stable on my Toshiba
Libretto L1. I can only get X to use 800x600 when it should be using
1280x600. I added several different modelines which can be seen in
the xorg.conf below. I am including dmesg, xorg.conf, and Xorg.0.log.
Any ideas what I can do to get it running at 1280x600. Thanks.
Bryan
OpenBSD 3.9-stable (GENERIC) #2: Tue Sep 12 18:25:13 PDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Transmeta(tm) Crusoe(tm) Processor TM5600 ("GenuineTMx86" 586-
class) 598 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,CX8,SEP,CMOV,MMX
real mem = 251158528 (245272K)
avail mem = 222183424 (216976K)
using 3091 buffers containing 12660736 bytes (12364K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 10/15/01, BIOS32 rev. 0 @
0xfb5d9
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01c0/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Transmeta Virtual Northbridge" rev 0x01
"Transmeta Mem1" rev 0x00 at pci0 dev 0 function 1 not configured
"Transmeta Mem2" rev 0x00 at pci0 dev 0 function 2 not configured
vga1 at pci0 dev 4 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
autri0 at pci0 dev 6 function 0 "Acer Labs M5451 Audio" rev 0x01: irq 11
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AKM 3D
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci0 dev 15
function 0 not configured
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev
0xc3: DMA, channel 0 wired to compatibility, channel 1 wired to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4019GAX>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00:
74KHz clock
iic0 at alipm0
admtemp0 at iic0 addr 0x4c: adm1032
cbb0 at pci0 dev 18 function 0 "Toshiba ToPIC100 CardBus" rev 0x31:
irq 11
ohci0 at pci0 dev 20 function 0 "Acer Labs M5237 USB" rev 0x03: irq
10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
biomask effd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
wi0 at pcmcia0 function 0 "INTERSIL, HFA384x/IEEE, Version 01.02"
port 0xa000/64
wi0: PRISM2.5 ISL3873 (0x800c), Firmware 1.1.1 (primary), 1.7.4
(station), address 00:02:6f:01:ca:41
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person
obtaining a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without
limitation
# the rights to use, copy, modify, merge, publish, distribute,
sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be
included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org
Foundation shall
# not be used in advertising or otherwise to promote the sale, use or
other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse" # wsmouse protocol
Option "Device" "/dev/wsmouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4
& 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more
than
# 3 buttons and you need to map the wheel to different button ids to
avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
# ZaxisMapping is an option for handling the wheel
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "libretto"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#HorizSync 31.5 - 64.3
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#VertRefresh 50-70
VertRefresh 40.0 - 150.0
#Modeline "1280x600" 60 1280 1328 1512 1712 600 601 603 625
#DisplaySize 227 109
#Modeline "1280x600" 71.34 1280 1312 1576 1608 600 612 619 631
Modeline "1280x600c" 63.61 1280 1280 1384 1688 600 600 604 628 -
hsync -vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "savage"
Driver "savage"
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen
section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "savage"
Monitor "libretto"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x600c"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device busy)
(WW) GARTInit: AGPIOC_INFO failed (Device not configured)
X Window System Version 6.9.0 (for OpenBSD)
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: OpenBSD 3.9 i386 [ELF]
Current Operating System: OpenBSD libretto.bsdjournal.net 3.9
GENERIC#2 i386
Build Date: 10 March 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 28 20:41:33 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "libretto"
(**) | |-->Device "savage"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/
X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/
fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/
100dpi/,/usr/X11R6/lib/X11/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on openbsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1279,0395 card 1279,0295 rev 01 class
06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1279,0396 card 1279,0295 rev 00 class
05,00,00 hdr 80
(II) PCI: 00:00:2: chip 1279,0397 card 1279,0295 rev 00 class
05,00,00 hdr 80
(II) PCI: 00:04:0: chip 5333,8c12 card 1179,0001 rev 13 class
03,00,00 hdr 00
(II) PCI: 00:06:0: chip 10b9,5451 card 1179,0001 rev 01 class
04,01,00 hdr 00
(II) PCI: 00:07:0: chip 10b9,1533 card 1179,0004 rev 00 class
06,01,00 hdr 00
(II) PCI: 00:0f:0: chip 104c,8020 card 1179,0001 rev 00 class 0c,
00,10 hdr 00
(II) PCI: 00:10:0: chip 10b9,5229 card 1179,0004 rev c3 class
01,01,e0 hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 1179,0001 rev 00 class
06,80,00 hdr 00
(II) PCI: 00:12:0: chip 1179,0617 card fffc,0000 rev 31 class
06,07,00 hdr 82
(II) PCI: 00:14:0: chip 10b9,5237 card 1179,0004 rev 03 class 0c,
03,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
is set)
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:18:0), (0,1,1), BCTRL: 0x0440 (VGA_EN is
cleared)
(--) PCI:*(0:4:0) S3 Inc. 86C270-294 Savage/IX-MV rev 19, Mem @
0xe0000000/27, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xeff00000 from 0xefffffff
to 0xefefffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[1] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[2] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[3] -1 0 0x0f000000 - 0x0fffffff (0x1000000) MX[B]E
[4] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[8] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0x0f000000 from 0x0fffffff
to 0x0f000fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[1] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[2] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[3] -1 0 0x0f000000 - 0x0f000fff (0x1000) MX[B]E
[4] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[8] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0effffff (0xef00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0effffff (0xef00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[6] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[7] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[8] -1 0 0x0f000000 - 0x0f000fff (0x1000) MX[B]E
[9] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[10] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[15] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.9.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 2.0.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) SAVAGE: driver (version 2.0.2) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 00:04:0
(--) Assigning device section with no busID to primary device
(--) Chipset MobileSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0effffff (0xef00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[6] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[7] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[8] -1 0 0x0f000000 - 0x0f000fff (0x1000) MX[B]E
[9] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[10] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[15] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x0effffff (0xef00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[6] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[7] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[8] -1 0 0x0f000000 - 0x0f000fff (0x1000) MX[B]E
[9] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[10] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[18] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) SAVAGE(0): Chip: id 8c12, "Savage/IX-MV"
(--) SAVAGE(0): Engine: "MobileSavage"
(II) SAVAGE(0): mapping MMIO @ 0xe1000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 83.045 MHz
(--) SAVAGE(0): 1280x600 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1280x600
(--) SAVAGE(0): Found 13 modes at this depth:
[10f] 320 x 200, 70Hz
[112] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[115] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[11b] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
[11e] 640 x 400, 70Hz
[124] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[134] 320 x 240, 72Hz
[13e] 1400 x 1050, 60Hz, 75Hz
[144] 400 x 300, 72Hz
[154] 512 x 384, 70Hz
[175] 720 x 480, 75Hz
[17a] 720 x 576, 75Hz
(II) SAVAGE(0): libretto: Using hsync range of 31.50-82.00 kHz
(II) SAVAGE(0): libretto: Using vrefresh range of 40.00-150.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 1280x600 60Hz.
(II) SAVAGE(0): Not using mode "1280x600c" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 115 at 72Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/
interlace/doublescan)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "896x672" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "1792x1344" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "896x672" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "1856x1392" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "928x696" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "1856x1392" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "928x696" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "960x720" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "960x720" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "832x624" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x768" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 576x384 54Hz.
(II) SAVAGE(0): Not using default mode "576x384" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1024" (exceeds panel
dimensions)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "960x720" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using default mode "2048x1536" (insufficient
memory for mode)
(II) SAVAGE(0): Not using default mode "1024x768" (exceeds panel
dimensions)
(II) SAVAGE(0): Not using mode "1280x600c" (no mode of this name)
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(--) SAVAGE(0): Chose mode 115 at 75Hz.
(--) SAVAGE(0): Chose mode 115 at 72Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 115 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 85Hz.
(--) SAVAGE(0): Chose mode 112 at 75Hz.
(--) SAVAGE(0): Chose mode 112 at 72Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 112 at 60Hz.
(--) SAVAGE(0): Chose mode 11e at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 154 at 70Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 144 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 134 at 72Hz.
(--) SAVAGE(0): Chose mode 10f at 70Hz.
(--) SAVAGE(0): Virtual size is 800x600 (pitch 800)
(**) SAVAGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601
604 631 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601
604 625 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SAVAGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637
643 666 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600" 87.75 800 832 928 1080 600 600
602 625 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "800x600" 81.00 800 832 928 1080 600 600
602 625 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601
603 625 +hsync +vsync
(**) SAVAGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SAVAGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481
484 509 -hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SAVAGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481
484 500 -hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SAVAGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489
491 520 -hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490
492 525 -hsync -vsync
(**) SAVAGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480
482 500 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) SAVAGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401
404 445 -hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384
386 404 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384
386 400 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385
388 403 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385
388 403 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) SAVAGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384
388 409 interlace doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300
302 315 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300
302 312 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318
321 333 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300
302 314 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300
301 312 doublescan +hsync +vsync
(**) SAVAGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240
242 254 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240
242 250 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244
245 260 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245
246 262 doublescan -hsync -vsync
(**) SAVAGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200
202 222 doublescan -hsync +vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x0effffff (0xef00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xdfffe000 - 0xdfffffff (0x2000) MX[B]E
[7] -1 0 0x0f004000 - 0x0f007fff (0x4000) MX[B]E
[8] -1 0 0x0f001000 - 0x0f001fff (0x1000) MX[B]E
[9] -1 0 0x0f000000 - 0x0f000fff (0x1000) MX[B]E
[10] -1 0 0xeff00000 - 0xefefffff (0x0) MX[B]EO
[11] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000efe0 - 0x0000efff (0x20) IX[B]E
[19] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]E
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) SAVAGE(0): mapping framebuffer @ 0xe0000000 with size 0x800000
(II) SAVAGE(0): map aperture:0x8bb94000
(--) SAVAGE(0): Chose mode 115 at 85Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
8 256x256 slots
(==) SAVAGE(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/wsmouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/,
removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/local/,
removing from list!
