I just upgraded my storage box to -current to test the ath upgrades on
another slower computer. I ran make install after compiling the
kernel instead of copying the kernel manually:
[EMAIL PROTECTED]:/home/ethant# ls -al /*bsd*
-rwxr-xr-x 1 root wheel 6049422 Sep 23 10:53 /bsd
-rw-r--r-- 1 root wheel 5002407 Aug 21 18:00 /bsd.rd
-rw-r--r-- 1 root wheel 6028254 Aug 21 18:00 /obsd
But the first 3 times I rebooted the system it booted the Aug 21 /obsd
kernel. The 4th time it finally booted the Sep 23 one. I kept
getting interrupted by the cat, the phone, and the cat while at the
boot prompt while I was troubleshooting and then the last time it
finally booted /bsd.
Any ideas on why that happened?
OpenBSD 4.0-current (GENERIC) #0: Sat Sep 23 10:45:45 PDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.54 GHz
cpu0:FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE
real mem = 267939840 (261660K)
avail mem = 236662784 (231116K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/22/05, BIOS32 rev. 0 @ 0xfdae0,
SMBIOS rev. 2.3 @ 0xf0650 (25 entries)
bios0: ECS M848A
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf77d0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x2200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 746 PCI" rev 0x10
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 746: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2F040J0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 3, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 5, version 1.0,
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 7, address
00:16:ec:54:69:65
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
wi0 at pci0 dev 9 function 0 "Intersil PRISM2.5" rev 0x01: irq 11
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.0.7 (primary), 1.3.6
(station), address 00:05:5d:fa:1a:75
ami0 at pci0 dev 11 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 11
ami0: LSI 523, 64b/lhc, FW 712T, BIOS vG116, 64MB RAM
ami0: 1 channels, 0 FC loops, 3 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 102400MB, 102400 cyl, 64 head, 32 sec, 512 bytes/sec, 209715200 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 40960MB, 40960 cyl, 64 head, 32 sec, 512 bytes/sec, 83886080 sec total
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed
sd2: 9263MB, 9263 cyl, 64 head, 32 sec, 512 bytes/sec, 18970624 sec total
scsibus1 at ami0: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
dkcsum: sd1 matches BIOS drive 0x82
dkcsum: sd2 matches BIOS drive 0x83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
