Well, here it goes again:
Issue with my onboard
mskc0: "Marvell Yukon 88E8053" Marvell Yukon-2
With the newest i386 (quite old btw.) snapshot, I can use msk0 without
any troubles UNTIL I start X on the machine.
As soon as I do that interrupts go to 99% and everything starts to crawl
until I reboot. Pretty much same issue I had before with the difference
that I know the "cause".
I'll try another graphic card and will report back.
Any other hints about what I could test to solve/further isolate the
problem?
dmesg:
OpenBSD 4.0 (GENERIC) #1104: Fri Sep 1 11:54:27 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: Cool`n'Quiet K8 1801 Mhz: speeds: 1800 1000 Mhz
real mem = 2145873920 (2095580K)
avail mem = 1949392896 (1903704K)
using 4256 buffers containing 107397120 bytes (104880K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(24) BIOS, date 01/25/06, BIOS32 rev. 0 @ 0xf1e40,
SMBIOS rev. 2.3 @ 0xf0000 (69 entries)
bios0: ASUSTek Computer INC. A8V-E DELUXE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde40/320 (18 entries)
pcibios0: PCI Exclusive IRQs: 3 5 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xd000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8T890 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8T890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8T890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8T890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8T890 Host" rev 0x00
"VIA K8T890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8T890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon X600 (RV380)" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X600 (RV380) Sec" rev 0x00 at pci2 dev 0 function 1 not configured
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 3 function 1 "VIA K8T890 PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
ppb4 at pci0 dev 3 function 2 "VIA K8T890 PCI-PCI" rev 0x00
pci5 at ppb4 bus 5
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Marvell
Yukon-2 EC rev. A3 (0x2): irq 11
msk0 at mskc0 port A, address 00:11:d8:aa:4a:61
eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
ppb5 at pci0 dev 3 function 3 "VIA K8T890 PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
emu0 at pci0 dev 12 function 0 "Creative Labs SoundBlaster Live" rev 0x08: irq 5
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x08 at pci0 dev 12 function 1 not
configured
pciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP2014N>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <AOpen, DVD-1640 PRO, 1.24> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4082B, A209> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
lm1 at iic0 addr 0x2f: W83791SD
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0x88)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 4
uhub5: Standard Microsystems product 0xa700, rev 2.00/0.00, addr 2
uhub5: 3 ports with 3 removable, bus powered, multiple transaction translators
uhub6 at uhub0 port 2
uhub6: Lite-On Technology USB 1.1 2port downstream low power hub, rev
1.10/1.00, addr 2
uhub6: 3 ports with 2 removable, bus powered
uhidev0 at uhub6 port 1 configuration 1 interface 0
uhidev0: Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 ), rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub6 port 1 configuration 1 interface 1
uhidev1: Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 ), rev 1.10/1.00, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub6 port 3 configuration 1 interface 0
uhidev2: Logitech USB-PS/2 Optical Mouse, rev 2.00/25.00, addr 4, iclass 3/1
ums0 at uhidev2: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Regards,
ahb
p.s. why are there no new snapshots?
