Problem: After updating to OpenBSD 3.9 stable, my system locks up
whenever a dc interface is brought "up". This system has 5 network
interfaces, one on-board (vr0), and a Phobos P430 Quad NIC
(dc0,dc1,dc2,dc3). The vr0 interface works fine.
At first, I could not get the system to finish booting up. It would hang
at "starting network". I then removed the files:
/etc/hostname.dc0
/etc/hostname.dc1
/etc/hostname.dc2
/etc/hostname.dc3
and the system boots up. However, when I do either:
# ifconfig dc0 up
# ifconfig dc1 up
# ifconfig dc2 up
# ifconfig dc3 up
The system locks up.
Here is the dmesg:
OpenBSD 3.9-stable (GENERIC) #1: Sun Sep 3 11:32:26 PDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1300MHz ("CentaurHauls" 686-class) 1.30 GHz
XSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 469344256 (458344K)
avail mem = 421076992 (411208K)
using 4278 buffers containing 23568384 bytes (23016K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cd) BIOS, date 05/16/06, BIOS32 rev. 0 @ 0xfa950
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd04
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc50/176 (9 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x0314 rev 0x00
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1314 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2314 rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4314 rev 0x00
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7314 rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "VIA", unknown product 0x3344 rev
0x01: aperture at 0xf4000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
wd0 at pciide1 channel 1 drive 0: <ST94813A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
:e6:43:8e
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
ppb1 at pci0 dev 19 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
dc0 at pci2 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 11, address
00:60:f5:04:0a:10
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 3
dc1 at pci2 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 11, address
00:60:f5:04:0a:11
lxtphy1 at dc1 phy 1: LXT970 10/100 PHY, rev. 3
dc2 at pci2 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 11, address
00:60:f5:04:0a:12
lxtphy2 at dc2 phy 1: LXT970 10/100 PHY, rev. 3
dc3 at pci2 dev 7 function 0 "DEC 21142/3" rev 0x41: irq 11, address
00:60:f5:04:0a:13
lxtphy3 at dc3 phy 1: LXT970 10/100 PHY, rev. 3
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02: HM WDG: not activated
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask efed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
