Scott Radvan <[EMAIL PROTECTED]> writes:
> Hello misc,
>
>
> I have been installing 4.0- beta snapshots via FTP on a few machines
> (i386 and amd64) and after installation, one of the sysctl
> modifications I always make is increasing net.inet.tcp.recvspace so I
> can make full use of my 9Mbit ADSL2+ line.
>
<snip>
When you say "increasing" what is the proportion?
I've a 20 Mbits ADSL2+ line here in France and the default value install
is 16384. How can I make full use of my ADSL2+ line?
$ sysctl net.inet.tcp.recvspace
net.inet.tcp.recvspace=16384
OpenBSD 3.9 (GENERIC) #0: Sun Aug 27 17:50:23 CEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Cyrix 6x86 (486-class)
real mem = 200912896 (196204K)
avail mem = 176349184 (172216K)
using 2478 buffers containing 10149888 bytes (9912K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(51) BIOS, date 06/12/98, BIOS32 rev. 0 @ 0xf0490
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xab2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0a40/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 5591 PCI" rev 0x02
pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 5597/5598: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L010AVER07-0>
wd0: 16-sector PIO, LBA, 9541MB, 19541088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SCR-3231, S102> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0x01
"SiS 5595 System" rev 0x00 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x11: irq 9, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6326 VGA" rev 0x0b: aperture at 0xe7800000,
size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sis0 at pci0 dev 10 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 12,
address 00:0f:b5:8f:6d:a9
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 11 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:0f:b5:8f:94:de
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 12 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11,
address 00:0f:b5:08:b5:ff
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: LM78
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e365 netmask ff65 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Thanks in advance.
Francois
--
http://www.chambaud.org
