Matt Kolb wrote:
stan writes:
I've got a bunch of Sun 2100 machines. Nice machine that i plan on
doing a
number of things with. I'd prefer to use OpenBSD on them for
firewalls, and
other network related tasks.
I've got 2 x 250G drives in these machines, and want to mirror them.
Under
FreeBSD the built in RAID controller (OK semi-software RAID) works, but
apparently it does not under OpenBSD. Is this correct? or am I missing
something?
If it's not supported, are there plans to add support for it?
BTW, It's the 3.9 64 bit install set I'm trying to install. If I turn
off
RAID in the firmware, everything works fine. If I enable it the disks
are
not detected at all.
As an aside to this, I would like to know if there are plans to
support the x4[12]00 SAS controller -- this does work in FreeBSD
-current.
./matt
Using -current as of about a week after the last hack-a-thon, the x4?00
SAS worked. From a dmesg I posted on 6/6/06, here is the relevant part:
| mpi0 at pci2 dev 3 function 0 "Symbios Logic SAS1064" rev 0x02: apic 6 int
| 0 (irq 11)
| scsibus0 at mpi0: 63 targets
| sd0 at scsibus0 targ 2 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2
| 0/direct fixed
| sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec
total
It worked using both bsd and bsd.mp. But that was using the AMD64 port. As
always, YMMV.
Nick
