Yeah this is known and both dlg and I have been meaning to clean this up.
Thanks for the kick in the butt.  I'll try to do this on the airplane tomorrow.

On Wed, Aug 23, 2006 at 05:11:09PM -0400, Nick Bender wrote:
> Just did an August 22nd snapshot install in a VM running under the
> free VMWare Server product. The host is Windows XP and the guest
> is intalled on a scsi disk (LSI Logic chosen during create) in the VM.
> 
> During boot there are a number of mpi messsages which do not seem
> to have any effect on the running system and are not repeated when
> doing things like dd from /dev/rsd0a, find / , and building from source.
> 
> Checking the archives I see that this was crashing the vm at some
> point and the changelog indicates it was fixed so maybe these should
> just be viewed as warnings?
> 
> -N
> 
> dmesg:
> 
> OpenBSD 4.0-beta (GENERIC) #1083: Mon Aug 21 21:24:02 MDT 2006
>    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3,DS-CPL
> real mem  = 267939840 (261660K)
> avail mem = 236683264 (231136K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(8f) BIOS, date 04/17/06, BIOS32 rev. 0 @
> 0xfd880, SMBIOS rev. 2.31 @ 0xe0010 (45 entries)
> bios0: VMware, Inc. VMware Virtual Platform
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev
> 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1a00! 0xca000/0x1000
> 0xdc000/0x4000! 0xe0000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> pciide0: channel 0 ignored (disabled)
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
> disabled
> vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> mpi0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: irq 9
> scsibus1 at mpi0: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <VMware,, VMware Virtual S, 1.0> SCSI2
> 0/direct fixed
> sd0: 20480MB, 2610 cyl, 255 head, 63 sec, 512 bytes/sec, 41943040 sec
> total
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> pcn0 at pci0 dev 17 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
> Am79c970A, rev 0: irq 11, address 00:0c:29:5e:5a:a3
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask e765 netmask ef65 ttymask ffe7
> pctr: user-level cycle counter enabled
> mpi0:  xs cmd: 0x1b len: 0 error: 0x01 flags 0x1a8
> mpi0:  target_id: 0 bus: 0 msg_length: 8 function: 0x00
> mpi0:  cdb_length: 6 sense_buf_length: 0 msg_flags: 0x00
> mpi0:  msg_context: 0x00000058
> mpi0:  scsi_status: 0x02 scsi_state: 0x01 ioc_status: 0x0000
> mpi0:  ioc_loginfo: 0x00000000
> mpi0:  transfer_count: 0
> mpi0:  sense_count: 18
> mpi0:  response_info: 0x00000000
> mpi0:  tag: 0x0000
> mpi0:  xs error: 0x01 xs status: 2
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> mpi0:  xs cmd: 0x1b len: 0 error: 0x01 flags 0x188
> mpi0:  target_id: 0 bus: 0 msg_length: 8 function: 0x00
> mpi0:  cdb_length: 6 sense_buf_length: 0 msg_flags: 0x00
> mpi0:  msg_context: 0x0000005f
> mpi0:  scsi_status: 0x02 scsi_state: 0x01 ioc_status: 0x0000
> mpi0:  ioc_loginfo: 0x00000000
> mpi0:  transfer_count: 0
> mpi0:  sense_count: 18
> mpi0:  response_info: 0x00000000
> mpi0:  tag: 0x0000
> mpi0:  xs error: 0x01 xs status: 2
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> mpi0:  xs cmd: 0x1b len: 0 error: 0x01 flags 0x1a8
> mpi0:  target_id: 0 bus: 0 msg_length: 8 function: 0x00
> mpi0:  cdb_length: 6 sense_buf_length: 0 msg_flags: 0x00
> mpi0:  msg_context: 0x00000065
> mpi0:  scsi_status: 0x02 scsi_state: 0x01 ioc_status: 0x0000
> mpi0:  ioc_loginfo: 0x00000000
> mpi0:  transfer_count: 0
> mpi0:  sense_count: 18
> mpi0:  response_info: 0x00000000
> mpi0:  tag: 0x0000
> mpi0:  xs error: 0x01 xs status: 2
> mpi0:  xs cmd: 0x1b len: 0 error: 0x01 flags 0x188
> mpi0:  target_id: 0 bus: 0 msg_length: 8 function: 0x00
> mpi0:  cdb_length: 6 sense_buf_length: 0 msg_flags: 0x00
> mpi0:  msg_context: 0x0000006b
> mpi0:  scsi_status: 0x02 scsi_state: 0x01 ioc_status: 0x0000
> mpi0:  ioc_loginfo: 0x00000000
> mpi0:  transfer_count: 0
> mpi0:  sense_count: 18
> mpi0:  response_info: 0x00000000
> mpi0:  tag: 0x0000
> mpi0:  xs error: 0x01 xs status: 2

Reply via email to