i am runnin openbsd-current and i ve installed kismet from the ports
the only change i did in the kismet.conf is the source=radiotap_bsd_b,ath0,scan
I run kismet, and it doesnt find any networks. It seems that it cant
capture any packets.
In paraller i run tcpdump -i ath0 -y IEEE802_11_RADIO and still no
captures via tcpdump
If i run ifconfig -M ath0 , ifconfig finds networks and tcpdump also
reports the packets.
i also downloaded the latest stable-devel svn of kismet wireless and
still the same thing. No networks.
Do you have any idea why is that happening ?
(By the way i only want kismet just to show the rssi and noise level
in dbm because ifconfig wont show such details.
Thank you in advance.
Bellow there is a dmesg of my system
OpenBSD 4.0-beta (AWMN-CUSTOM) #0: Sun Aug 13 03:11:30 EEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/AWMN-CUSTOM
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 932 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 402157568 (392732K)
avail mem = 358367232 (349968K)
using 4256 buffers containing 20209664 bytes (19736K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f9) BIOS, date 01/06/01, BIOS32 rev. 0 @
0xfb190, SMBIOS rev. 2.2 @ 0xf0800 (43 entries)
bios0: VIA Technologies, Inc. VT82C694X
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdbb4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb20/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0xc4
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to comp
atibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct08 13>
wd0: 16-sector PIO, LBA, 12416MB, 25429824 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x16: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x16: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x50: irq 12
ac97: codec id 0x49434511 (ICEnsemble ICE1232)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio at auvia0 not configured
vga1 at pci0 dev 9 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 12 function 0 "3Com 3cSOHO 100B-TX" rev 0x31: irq 10,
address 00:04:75:b4:fa:9e
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000749, model 0x0001
ath0 at pci0 dev 13 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, FCC2A*, address
00:0b:85:03:05:70
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e765 netmask ef65 ttymask efe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
