Hi, I've been stuck with an Intel pro/1000MT card that is failing with the checksum not valid.
I've found this in the archives: http://marc.theaimsgroup.com/?l=openbsd-misc&m=113052293924074&w=2 That shows this may have been addressed for the 3.8 release which I am on. Also the rev that did not work is the same as the one I have. Has anyone had further luck on this? I am running it on OpenBSD 3.8, but possibly this weekend I will be trying it on a 3.9 or newer. Here is what I thought was the relevant part of the dmesg, followed by a full dmesg: Thanks! -------------------- em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5, address: 00:09:6b:7f:70:93 ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci2 at ppb1 bus 2 em1 at pci2 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x01: irq 5 em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci2 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x01: irq 5 em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 ---------------------- Full DMESG ---------------------- OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID real mem = 1609588736 (1571864K) avail mem = 1461350400 (1427100K) using 4278 buffers containing 80580608 bytes (78692K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(49) BIOS, date 05/19/04, BIOS32 rev. 0 @ 0xfd5b6 pcibios0 at bios0: rev 2.1 @ 0xfd520/0xae0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/352 (20 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x1000 0xcb000/0x1800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02 ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02 pci1 at ppb0 bus 1 em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5, address: 00:09:6b:7f:70:93 ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci2 at ppb1 bus 2 em1 at pci2 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x01: irq 5em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware em2 at pci2 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x01: irq 5em2: The EEPROM Checksum Is Not Valid em2: Unable to initialize the hardware uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 11 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a pci3 at ppb2 bus 3 vga1 at pci3 dev 2 function 0 "ATI Radeon VE QY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci3 dev 8 function 0 "Intel 82557" rev 0x0c, i82550: irq 11, address 00:0e:0c:50:d7:c4 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8482B, 1.02> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd0 at pciide0 channel 1 drive 0: <Maxtor 6Y080M0> wd0: 16-sector PIO, LBA, 76324MB, 156312576 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 "Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ef65 netmask ef65 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302
