Hi List,
as they say, the problem was between keyboard and chair...
I had assumed that the remote and local consoles would work
in parallel, which was a false assumption. The remote console
renders the local console input (kb, mouse) inactive. As soon
as the remote console is terminated, the local input devices
function again.
Sorry for wasting your time...
Robert Urban
You wrote:
> Hello,
>
> has anyone else noticed that after booting, the keyboard on a
> ProLiant (DL380-G2) with the RILOE (Remote Insight Lights-Out Edition) card
> often freezes? If I take the RILOE card out, the kb is always ok.
>
> Rob Urban
>
> Here's my dmesg:
>
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class)
> 1.27 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,M
> MX,FXSR,SSE
> real mem = 1073307648 (1048152K)
> avail mem = 972660736 (949864K)
> using 4278 buffers containing 53768192 bytes (52508K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 9 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xee000/0x2000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
> pci1 at pchb0 bus 1
> ppb0 at pci1 dev 3 function 0 "Intel i960 RP PCI-PCI" rev 0x05
> pci2 at ppb0 bus 2
> vga1 at pci2 dev 0 function 0 "ATI Mach64 GV" rev 0x7a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 80960RP ATU" rev 0x05 at pci1 dev 3 function 1 not configured
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
> pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
> pci3 at pchb3 bus 7
> "Compaq PCI Hotplug" rev 0x12 at pci3 dev 7 function 0 not configured
> ciss0 at pci0 dev 1 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: ir
q
> 3
> ciss0: 1 LD, HW rev 1, FW 2.62/2.62
> scsibus0 at ciss0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.62> SCSI0 0/direct
> fixed
> sd0: 17359MB, 17359 cyl, 64 head, 32 sec, 512 bytes/sec, 35553120 sec total
> fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: irq 5, address
> 00:08:02:8a:4b:fc
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 7, address
> 00:08:02:8a:4b:fb
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 6 function 0 not configured
> piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus disabled
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM SN-124, N102> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04: irq 11,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ef4d netmask efed ttymask ffef
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
