Hi Stuart.
I received the NIC today.
The chip is found and seems to be working well, caught with the 82541GI
driver as you said.
I'm running 3.9 release.
The chip is a 82541PI as my supplier stated.
I don't know if the man page should be updated, or if anything else is
needed.
I'll be available if you need any further information.
A dmesg is attached.
Thanks for your help.
- Lasse Bach
Stuart Henderson wrote:
> On 2006/07/28 13:19, Lasse Bach wrote:
>
>> Looking through the supported hardware for i386 page I found that
>> "i82541" is supported in the gigabit section.
>> Looking in the em(4) manpage I found that a series of 82541's is
>> supported. But the PI is not listed.
>>
>
> I think it may be caught by the 82541GI_LF entry on -current,
> if not then send the dmesg, it will be a simple change.
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 536371200 (523800K)
avail mem = 482410496 (471104K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ca) BIOS, date 04/29/02, BIOS32 rev. 0 @ 0xf1620
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1c72
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1bc0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xcc000/0x800 0xd0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82850 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G550 AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x04
pci2 at ppb1 bus 2
ohci0 at pci2 dev 4 function 0 "NEC USB" rev 0x41: irq 9, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 4 function 1 "NEC USB" rev 0x41: irq 9, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 4 function 2 "NEC USB" rev 0x02: irq 9
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
xl0 at pci2 dev 10 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 9, address
00:10:5a:cc:69:b5
exphy0 at xl0 phy 24: 3Com internal media interface
xl1 at pci2 dev 11 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 9, address
00:10:5a:37:39:a2
exphy1 at xl1 phy 24: 3Com internal media interface
xl2 at pci2 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9, address
00:02:2e:f0:47:90
bmtphy0 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
em0 at pci2 dev 13 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: irq 5,
address 00:0e:0c:b7:30:a6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x04: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L040AVER07-0>
wd0: 16-sector PIO, LBA, 39266MB, 80418240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN526, YH0X> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x04: irq 9
usb3 at uhci0: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x04: irq 9
usb4 at uhci1: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x04: irq 10, ICH2
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask eb45 netmask eb65 ttymask fbe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
