Any ideas what can be a wrong?
on -Current (3.8, 3.9, 3.9STABLE too)
ahd0: target 0 using asynchronous transfers
ahd0: SCB = 508 Not Active!
panic: Waiting list traversal
Stopped ad Debugger+0x4: popl %ebp
after some seconds it freezes
No newer BIOS available
And SMP kernel is not working too.
HW: HP ML 150 G2
DMESG HERE:
OpenBSD 3.9-current (SMTP-PROXY) #2: Tue Jun 27 14:28:24 EEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/SMTP-PROXY
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 535834624 (523276K)
avail mem = 486215680 (474820K)
using 4256 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8b) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd88f,
SMBIOS rev. 2.33 @ 0xdc010 (48 entries)
bios0: HP ProLiant ML150 G2
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd4b0/0xb50
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x8c00 0xdc000/0x4000!
ipmi0 at mainbus0ipmi0: bmc_io_wait_cold fails : *v=ff m=02 b=00 write_cmd
kcs_sendmsg: 18 01
: unable to send get device id command
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7320 MCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
irq 10, address 00:16:35:b1:b4:5a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci3 at ppb2 bus 3
ahd0 at pci3 dev 4 function 0 "Adaptec AIC-7901 U320" rev 0x10: irq 9
ahd0: aic7901, U320 Wide Channel A, SCSI Id=7, PCI-X 50-66Mhz, 512 SCBs
scsibus0 at ahd0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, BF03688284, HPB3> SCSI3 0/direct fixed
sd0: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132000 sec total
safte0 at scsibus0 targ 8 lun 0: <SDR, GEM318P, 1> SCSI2 3/processor fixed
"Intel 6300ESB USB" rev 0x02 at pci0 dev 29 function 0 not configured
"Intel 5300ESB USB" rev 0x02 at pci0 dev 29 function 1 not configured
ichwdt0 at pci0 dev 29 function 4 "Intel 6300ESB WDT" rev 0x02: 1kHz clock
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
"Intel 6300ESB USB" rev 0x02 at pci0 dev 29 function 7 not configured
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci4 at ppb3 bus 4
vga1 at pci4 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
drive at pciide0 channel 0 drive 0 not configured
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: irq 10
iic0 at ichiic0
lm3 at iic0 addr 0x2c: W83792D rev B
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
ahd0: target 0 synchronous with period = 0x8, offset = 0x3f(DT|IU|RTI|QAS)
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
