Hi there,
$subject sums it up real nice :)
I'm trying to get access to two older harddisks on my -current box, but I
can't even finish to boot the kernel. dmesg and page fault are provided.
Please CC me, as I'm currently not tracking [EMAIL PROTECTED]
If you need more information, I'd be happy to provide it.
Thanks,
Stephan
>> OpenBSD/amd64 BOOT 2.11
boot>
booting hd0a:/bsd: 3854724+832968+627488+0+420752 [80+324408+200876]=0x9f92c4
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, ac20a304]{[ using
526136 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.9-current (GENERIC) #594: Sun Jun 18 12:31:51 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1835540480 (1792520K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (40 entries)
bios0: Gigabyte Technology Co., Ltd. GA-K8NMF-9
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1809.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: Cool`n'Quiet K8 1809 Mhz: speeds: 1800 1000 Mhz
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 10, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 12,
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6B200P0>
wd0: 16-sector PIO, LBA48, 194479MB, 398294975 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide0 channel 1 drive 0: <WDC AC2850F>
wd1: 16-sector PIO, LBA, 814MB, 1667232 sectors
wd2 at pciide0 channel 1 drive 1: <ST3290A>
wd2: 32-sector PIO, CHS, 249MB, 1001 cyl, 15 head, 34 sec, 510510 sectors
wd1(pciide0:1:0): using PIO mode 3, DMA mode 1
wd2(pciide0:1:1): using PIO mode 3
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
ral0 at pci1 dev 7 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:09:f3:70:25:a6
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 5, address
00:14:85:0c:12:fe
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
uhidev0 at uhub0 port 7 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouse. Explorer, rev 1.10/1.14, addr 2,
iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 8 configuration 1 interface 0
uhidev1: Cherry Mikroschalter product 0x0023, rev 2.00/0.20, addr 3, iclass
3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 8 configuration 1 interface 1
uhidev2: Cherry Mikroschalter product 0x0023, rev 2.00/0.20, addr 3, iclass
3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
wd1c: aborted command reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying
wd1: transfer error, downgrading to PIO mode 3
kernel: page fault trap, code=0
Stopped at nforce_setup_channel+0x1d3: movzbl
wdc_pdc203xx_vtbl+0x14c
(%rax),%eax
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
7 0 0 0 3 0x100204 pftm pfpurge
6 0 0 0 3 0x100204 timeout sensors
5 0 0 0 3 0x100204 wait wskbd_hotkey
4 0 0 0 3 0x100204 usbevt usb1
3 0 0 0 3 0x100204 usbtsk usbtask
2 0 0 0 3 0x100204 usbevt usb0
1 0 0 0 3 0x4 initexec swapper
0 -1 0 0 3 0x80204 biowait swapper
ddb> trace
nforce_setup_channel() at nforce_setup_channel+0x1d3
wdc_downgrade_mode() at wdc_downgrade_mode+0x9e
ata_dmaerr() at ata_dmaerr+0x3b
wdc_ata_bio_intr() at wdc_ata_bio_intr+0x175
wdcintr() at wdcintr+0xba
Xintr_legacy15() at Xintr_legacy15+0xf8
--- interrupt ---
end trace frame: 0x0, count: -6
wdstrategy:
ddb>
