Hi all.
TOSHIBA 305CDT:
Not working: sound
1. mpg321 says:
Can't find a suitable libao driver. (Is device in use?)
2. mpg123 and mplayer plays the file with no sound
3. in aumix all sliders are locked, only mute/unmute
changes something
Not tested: serial, lpt, mic., cdplay, (irda)
Working: the rest (zzz as well)
If somebody feels like fixing this, please let me know if
tests needed.
OpenBSD 3.9-current (GENERIC) #882: Thu Jun 15 12:43:50 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 167 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 33255424 (32476K)
avail mem = 21999616 (21484K)
using 431 buffers containing 1765376 bytes (1724K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/26/97, BIOS32 rev. 0 @ 0xfe95a
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 51%
apm0: AC off, battery charge high, estimated 1:29 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8e80/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Toshiba PCI" rev 0x2c
vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 11 function 0 "NEC USB" rev 0x02: irq 11, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Toshiba Fast Infrared Type O" rev 0x21 at pci0 dev 17 function 0 not configured
cbb0 at pci0 dev 19 function 0 "Toshiba ToPIC97 CardBus" rev
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 19 function 1 "Toshiba ToPIC97 CardBus" rev
0x20pci_intr_map: no mapping for pin B
: couldn't map interrupt
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4310MAT>
wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors
wd0(wdc0:0:0): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-220EA, 7.0A> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "BUFFALO, LPC3-CLT, R01" port 0x300/32, irq
3, address 00:07:40:19:8e:d5
pcic0: irq 9, polling enabled
biomask e945 netmask e94d ttymask fbcf
pctr: 586-class performance counters and user-level cycle counter enabled
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.05, addr
2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
------------------------------------------------------------------
BIOS
PERIPHERAL
Parallel Port Mode = ECP
Hard Disk Mode = Enchanced IDE (Normal)
I/O PORTS
Serial = COM1(3F8H/IRQ4)
Paralel = LPT1(378H/IRQ7/CH3)
Sound
WSS I/O Address = 530H
SBPro I/O Address = 220H
Synthesizer I/O Address = 388H
WSS & SBPro & MPU401 IRQ Level = IRQ5
WSS(Play) DMA = Channel 1
WSS(Rec.) & SMBro DMA = Channel 0
Control I/O Address = 370H
MPU401 (MIDI I/F) = 330H
DISPLAY
VGA Segment Address = C000H
PCI BUS
PCI BUS = IRQ11
PC CARD
Controller Mode = Auto-Selected
DRIVES I/O
Built-in HDD = Primary IDE(1F0H/IRQ14)
Build-in CD-ROM = Secondary IDE(170H/IRQ15)
FLOPPY DISK I/O
Floppy Disk = (3F2H/IRQ6/CH2)
------------------------------------------------------------------
audioctl:
name=SoundBlaster
version=3.01
config=SB_Pro
encodings=ulinear:8,mulaw:8*,alaw:8*,slinear:8*
properties=mmap,independent
full_duplex=0
fullduplex=0
blocksize=400
hiwat=163
lowat=122
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=128
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0
mixerctl:
outputs.master=128,128
outputs.fmsynth=128,128
outputs.cd=128,128
outputs.dac=128,128
outputs.mic=0
outputs.line=0,0
record.source=
inputs.treble=off
inputs.bass=on
