On Thu, Jun 08, 2006 at 02:32:39PM -0400, Josh Grosse wrote:
> I noticed it after just installing it as an upgrade. I was seeing a
> segmentation fault as /etc/rc was running, and traced it to savecore.
>
> The segmentation fault will drop a core file if I run it manually. gdb says:
>
> Core was generated by `savecore'.
> Program terminated with signal 11, Segmentation fault.
> #0 0x1c004a50 in ?? ()
> (gdb)
>
> Obviously, I wonder if this is recreatable by others; that would lead me to
> think it might possibly be the snapshot.
>
> If not, then I know its something local.
i just commmited the fix that i had for three weeks in my tree (:
wait some time till the mirrors propagate and update.
that should fix it.
> Anyone using this snap?
>
> (For completeness, my dmesg follows)
>
> OpenBSD 3.9-current (GENERIC) #870: Wed Jun 7 17:11:37 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Sempron(tm) 2600+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.84
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 502820864 (491036K)
> avail mem = 451043328 (440472K)
> using 4256 buffers containing 25243648 bytes (24652K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(37) BIOS, date 01/07/05, BIOS32 rev. 0 @ 0xfb9b0,
> SMBIOS rev. 2.2 @ 0xf0000 (44 entries)
> bios0: ASUS A7VT
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda10/112 (5 entries)
> pcibios0: PCI Exclusive IRQs: 3 5 10 11
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
> 0xe4000000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> dc0 at pci0 dev 8 function 0 "Lite-On PNIC-II" rev 0x25: irq 10, address
> 00:a0:cc:e3:42:d6
> dcphy0 at dc0 phy 31: internal PHY
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 3
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
> iic0 at viapm0
> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J880>
> wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW SHW-160P6S, PS01> SCSI0 5/cdrom
> removable
> wd1 at pciide0 channel 1 drive 1: <Maxtor 92732U8>
> wd1: 16-sector PIO, LBA, 26059MB, 53369568 sectors
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 5
> ac97: codec id 0x41445368 (Analog Devices AD1888)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auvia0
> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
> 00:11:2f:85:b1:90
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
> 0x004063, model 0x0032
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83697HF
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ff6d netmask ff6d ttymask ffef
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub0 port 1 configuration 1 interface 0
> uhidev0: vendor 0x062a product 0x0000, rev 1.10/0.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
--
paranoic mickey (my employers have changed but, the name has remained)
