This is not a obsd related question.
First make sure your screen and card can make that resolution.
Then include your xorg.conf and the Xorg log.
Please read the examples included first, and see if Xorg -configure can help.
here is what it can look like http://bkw.lindesign.se/tmp/xorg.conf
(for a acer tm 662)
don't forget to read
http://outlands.ca/linux/t8000.html
http://ruby2shoes.sourceforge.net/xbox/laptops/linuxOnTecra8000.html
http://www.geocities.com/goodjewishboy/tecra8000linux.html
I found things like..
"X resolution
After installation, X resolution is stuck at 640x480. I have not found
the cause, but I have been suggested a workaround that fix the
problem. Add the following line to the "Monitor" section of
/etc/X11/xorg.conf :
HorizSync 36-52
VertRefresh 36-60
"
/bkw
On 08/06/06, Joshua Sandbrook <[EMAIL PROTECTED]> wrote:
Gidday...
Anyone out there running 3.9 on a Toshiba Tecra 8000 ? Im trying to get it to
run at 1024x768 but its being grumpy.
Dmesg for good measure:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 233 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 167288832 (163368K)
avail mem = 145674240 (142260K)
using 2067 buffers containing 8466432 bytes (8268K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 26%
apm0: AC on, battery charge low, charging, estimated 0:37 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2200" rev 0x12
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2030AT>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not
configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin B
: couldn't map interrupt
isa0 at pcib0
isadma0 at isa0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 26%
apm0: AC on, battery charge low, charging, estimated 0:37 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2200" rev 0x12
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2030AT>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not
configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin B
: couldn't map interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "Dual Speed, 10/100 PC Card, 1.0" port 0x340/32, irq
3, address 00:e0:98:9f:b9:b4
nsphyter0 at ne3 phy 4: DP83815 10/100 PHY, rev. 3
pcic0: irq 9, polling enabled
biomask e945 netmask e94d ttymask fbcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Thanks,
Josh
--
/Bachman
