On Sun, 4 Jun 2006 16:09:03 +0200
Mitja Mu>enih <[EMAIL PROTECTED]> wrote:
> I even tried to replicate the problem locally on supposedly same
> hardware (HP Compaq dc5100 + 2x SATA HDDs) but here I couldn't get it
> to hang on raidframe. I did manage to consistently hang it by
> enabling the front two USB ports, tough.
Yep -- weird problem, it seems. This is an old (Compaq) Pentium machine,
with two 40GB Maxtor IDE drives (dmesg on 3.8-stable follows,
no GENERIC at hand, sorry, but this one runs fine)
> Eventually I had to abandon the idea of root-on-raid and use raid1
> just for the data set (without RAID_AUTOCONFIG it works for me).
Yes, disabling RAID_AUTOCONFIG permits the kernel to boot, but it
panics as it the does not find the root (which seems normal ;-). I'll
stay with 3.8 for now.
dmesg and the console output with RAIDDEBUG enabled follow -- it
appears the two RAID members are indeed recognized, but they somehow
can't be mounted as the root dev.
Simon
*** RAIDDEBUG ***
[...]
Kernelized RAIDframe activated
Searching for raid components...
Component on: wd0d: 79126992
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 20050900 Mod Counter: 491
Clean: Yes Status: 0
sectPerSU: 128 SUsPerPU: 1 SusPerRU: 1
RAIDLevel: 1 blocksize: 512 numBlocks: 79126912
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Component on: wd1d: 79126992
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 20050900 Mod Counter: 491
Clean: Yes Status: 0
sectPerSU: 128 SUsPerPU: 1 SusPerRU: 1
RAIDLevel: 1 blocksize: 512 numBlocks: 79126912
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
*** 3.8-stable dmesg ***
OpenBSD 3.8-stable (RAID-38-sjv1) #1: Fri Nov 11 20:03:37 CET 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAID-38-sjv1
RTC BIOS diagnostic error 2
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 233 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 402235392 (392808K)
avail mem = 362516480 (354020K)
using 4278 buffers containing 20213760 bytes (19740K) of memory
RTC BIOS diagnostic error 2
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 12/10/98, BIOS32 rev. 0 @ 0xf1700
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf1700/0x2100
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1cc0/112 (5 entries)
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7350/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C1595 PCI" rev 0x06
dc0 at pci0 dev 3 function 0 "Accton EN2242" rev 0x11: irq 11, address
00:04:e2:d5:42:5a
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C586 ISA" rev 0x41
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA33, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2F040J0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 80293248 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU571-Q, 1.1a> SCSI0 5/cdrom
removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 3, DMA mode 1
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"VIA VT82C586 Power" rev 0x10 at pci0 dev 7 function 3 not configured
vga0 at pci0 dev 15 function 0 "S3 Trio64V2/DX" rev 0x16
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
ep0 at isa0 port 0x300/16 irq 10: address 00:60:97:a6:d7:8c, utp (default utp)
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb6d netmask ff6d ttymask ffef
pctr: 586-class performance counters and user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 79126912 (38636 MB) as
root
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
