Hi,

A while ago, a message was posted in this list stating the sk based NICs were 
supposed to be good in performance and stability. 
Now, I have already had quite a few problems with D-LINK DGE-530T when used on 
Intel motherboards. On several ocasions, 
these NICs ended up causing WATCHDOG TIMEOUT. So, I would like to know if there 
is any known bad revision of one of this 
cards, or if there is any kind of test a can perform to see if there is a real 
problem with the NIC. Apparently, 
it is not a problem with the NIC itself, since I have used the same NIC that 
behaved badly on one board, and it behaved 
all right on another. The NICs show as 

skc0 at pci2 dev 2 function 0 "D-Link Systems DGE-530T" rev 0x11, Marvell Yukon 
(0x1): irq 3
sk0 at skc0 port A, address 00:13:46:72:00:24
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3

in the dmesg (which is attached below). I am asking because I read another 
message with complaints about this sk 
driver. Only it was:

skc0 at pci0 dev 14 function 0 "Schneider & Koch SK-9821 v2.0" rev 0x12:
irq 10
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3 (0x7)
sk0 at skc0 port A: address 00:0c:46:46:50:ec
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5

Any help will be appreciated.

Thanks in advance.

Regards,

Josi




OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SB
F,CNXT-ID
real mem  = 1072410624 (1047276K)
avail mem = 971837440 (949060K)
using 4278 buffers containing 53723136 bytes (52464K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/02/04, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3d30/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "SiS", unknown product 0x0325 rev 0x00: 
aperture at 0xe0000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
skc0 at pci2 dev 2 function 0 "D-Link Systems DGE-530T" rev 0x11, Marvell Yukon 
(0x1): irq 3
sk0 at skc0 port A, address 00:13:46:72:00:24
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
skc1 at pci2 dev 3 function 0 "D-Link Systems DGE-530T" rev 0x11, Marvell Yukon 
(0x1): irq 5
sk1 at skc1 port A, address 00:13:46:71:f8:0e
eephy1 at sk1 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
skc2 at pci2 dev 4 function 0 "D-Link Systems DGE-530T" rev 0x11, Marvell Yukon 
(0x1): irq 10
sk2 at skc2 port A, address 00:13:46:71:f7:cf
eephy2 at sk2 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 
0 configured to compatibility, channel 1
 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0802N>
wd0: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8525B, 1.03> SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 
configured to native-PCI, channel 1 conf
igured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
iic0 at ichiic0
adt0 at iic0 addr 0x2e: emc6d10x (ADT7460) rev 65
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 3, ICH5 
AC97
ac97: codec id 0x41445375 (Analog Devices AD1985)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302




-- 
___________________________________________________
Play 100s of games for FREE! http://games.mail.com/

Reply via email to