Hi,
Installed a 3.9 release, on a Dell PowerEdge 1850 with two Xeon EM64T
CPUs, using de amd64.SMP kernel the keyboard and the CD did not work
anymore, but the rest works fine, booting from the single cpu
amd64 kernel all works fine, and with the i386.SMP all works fine too.
Are there some tweaks to make the keyboard and the cd work with
the amd64.SMP kernel, or i must stay away from the amd64.SMP kernel
on this server?
dmesgs from amd64.SMP and i386.SMP below.
Thanks,
georg
***** dmesg amd64.SMP ******
OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146828288 (2096512K)
avail mem = 1835593728 (1792572K)
using 22937 buffers containing 214892544 bytes (209856K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016C )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 2993.11 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz, 2992.70 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type PCI
mpbios: bus 10 is type ISA
ioapic0 at mainbus0 apid 7: pa 0xffff80000373de24, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 7
ioapic1 at mainbus0 apid 8: pa 0xffff80000373dd24, version 20, 24 pins
ioapic1: misconfigured as apic 0
ioapic1: remapped to apic 8
ioapic2 at mainbus0 apid 9: pa 0xffff80000373dc24, version 20, 24 pins
ioapic2: misconfigured as apic 0
ioapic2: remapped to apic 9
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 8 int 14 (irq
7) Dell 16c 32b
ami0: FW 521X, BIOS vH430, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2 3/processor
fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9 int
0 (irq 11), address 00:13:72:53:2f:6c
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9 int
1 (irq 3), address 00:13:72:53:2f:6d
ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 16
(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 19
(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 18
(irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 7 int 23
(irq 5)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
***** end dmesg amd64.SMP ******
***** dmesg i386.SMP ******
OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 2146807808 (2096492K)
avail mem = 1952759808 (1906992K)
using 4278 buffers containing 107442176 bytes (104924K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/09/06, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb140/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x1000 0xcd000/0x2200
0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016C )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type ISA
ioapic0 at mainbus0: apid 7 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 7
ioapic1 at mainbus0: apid 8 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apic 8
ioapic2 at mainbus0: apid 9 pa 0xfec83000, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apic 9
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 8 int 14 (irq
7) Dell 16c 32b
ami0: FW 521X, BIOS vH430, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2 3/processor
fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9 int
0 (irq 11), address 00:13:72:53:2f:6c
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9 int
1 (irq 3), address 00:13:72:53:2f:6d
ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 16
(irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 19
(irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 7 int 18
(irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 7 int 23
(irq 5)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
***** end dmesg i386.SMP ******
