Robert wrote:
> Alexander Farber wrote:
>> Hello,
>>
>> I probably have a similar setup at strato.de and use Kili's trick:
>>
>> h754815:afarber {103} cat /etc/hostname.fxp0
>> inet 81.169.186.95 255.255.255.255 NONE
>> !route add 81.169.186.1 -link \$if: -interface
>>
>> See the explanation at http://www.dettus.net/
>>
>> Regards
>> Alex
>>
>> PS: I wonder if anyone successfully runs OpenBSD
>> at Strato's SR2, MR2 or LR2 as I'd like to upgrade
>>
>> On 5/11/06, Dan Farrell <[EMAIL PROTECTED]> wrote:
>>> Geez network setups just shouldn't be that strained... I mean, what
>>> happened to hooking up a server with a /30 connection to the nearest
>>> router? Am I missing something?
>>
>
> I think Strato, 1&1 and co introduced the .255 hack to counter sniffing.
> Using .0 netmask works, but won't allow traffic with other hosts in the
> same subnet. (Which shouldn't be a problem for most.)
>
> I have not tried any of the new Strato servers, but am experimenting
> with one of 1&1's new AMD64 systems.
> So far, nothing that i dd to the hd will boot.
> (tried 3.9 and current floppy and cd, modified for serial-acc and also
> disabling the usual kernel-options like pcibios)
>
> Anyone got one of those systems to run OpenBSD?
>
> For those interested here's the debian-resycue-system dmesg and lspci
> output for an 1&1 L64 server. Perhaps someone can see unsupported
> hardware i don't.
> http://openbsd.pap.st/1und1_L64.txt
>
> Any advice'd be much apreciated.
>
>
> -Robert
>
>
Thanks everyone!
Got OpenBSD 3.9 running on one of the "new" 1&1 L64 dedicated servers.
(It's the german offer. Was told, that 1&1 shows diffrent products
depending on your location.)
Here's how:
- on a 3.9 system get the yaifo src
http://openbsd-geek.de/projects/yaifo/wiki/BuildingInstaller
- before compiling edit yaifo-0.2/config
- DHCP=off
- enter your ip and nameserver (one from a diffent subnet than your
server. see below)
- SPECIAL=1 (Alturo is/was a reseller of old 1&1 servers. "netmask-hack")
- edit yaifo-0.2/install.sub
- VERSION=39
- you can follow the instructions on the yaifo page from here on
Had a problem with the nameresolution while installing. ctrl+z and an
echo to /etc/hosts helped.
I do not realy know why serial didn't work for me in my images. After
the yaifo install and a reboot later the serial console works. 'll have
to check that one out.
Now the up to -stable.
-Robert
PS: Yes, i installed i386 intentionally on an Athlon64 system.
btw:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3200+ ("AuthenticAMD" 686-class, 512KB
L2 cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD Powernow: TS FID VID TTP TM STC
cpu0: AMD Cool`n'Quiet K8 available states (38600,69400,77100)
real mem = 1038589952 (1014248K)
avail mem = 940888064 (918836K)
using 4278 buffers containing 52031488 bytes (50812K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(39) BIOS, date 01/02/06, BIOS32 rev. 0 @ 0xfd780
pcibios0 at bios0: rev 2.1 @ 0xfd780/0x880
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000 0xe2800/0x1400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 761 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x03: aperture at
0xf0000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 965 ISA" rev 0x48
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 5597/5598:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
stray interrupt 14
pciide0: channel 1 disabled (no drives)
stray interrupt 15
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 9, SiS7012
AC97
auich0: reset failed!
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 10,
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 5
ehci0: timed out waiting for BIOS
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pciide1 at pci0 dev 5 function 0 "SiS 182 SATA" rev 0x01: DMA
pciide1: using irq 9 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380817AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <ST380817AS>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ppb1 at pci0 dev 6 function 0 "SiS PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: irq 11, address
00:30:05:bb:12:34
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
ppb2 at pci0 dev 31 function 0 "SiS PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
