Was that an upgrade? When you do a fresh 3.9 install on a box that
already had a RAID partition built for an older version, once you reboot
into the GENERIC.RAID kernel, the system will come up using the older
OS installed in the RAID partition.
If that's the case, reboot with GENERIC, make sure you change the type
of the partition from RAID to 4.2BSD (disklabel -E wd0. then choose m
option. I guess you have to do this on wd1 as well. not sure).
Then reboot into GENERIC.RAID, change the type of the partition again
with disklabel from 4.2BSD to RAID, and configure your raid normally
Let me know if this helps... I'm curious.
Cheers
Mitja Mu>enih wrote:
> Hi!
>
> Yet another one of those weird things. HP Compaq dc5100, a couple thousand
> km away from me, I've got a KVM/IP and a 3.9 cd stuck in the drive.
>
> Installed -release, rebooted, cvs'd to 3.9-stable, built GENERIC.RAID,
> rebooted. GENERIC.RAID = GENERIC + option RAID_AUTOCONFIG + pseudo device
> raid 4.
>
> The boot stops at
>
> biomask e7fd netmask effd ttymask ffff
> pctr: user-level cycle counter enabled
> Kernelized RAIDframe activated
>
> and hangs here until the on-site person reboots it. I still have console
> scrollback at that point.
>
> Where should I start looking?
>
> I noticed that "biomask..." line is slightly different from the GENERIC
> kernel. Does anybody see anything peculiar in this dmesg?
>
>
> Thanks, Mitja
>
>
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,AC
> PI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
> cpu0: Enhanced SpeedStep disabled by BIOS
> real mem = 3212353536 (3137064K)
> avail mem = 2923577344 (2855056K)
> using 4278 buffers containing 160718848 bytes (156952K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(5f) BIOS, date 08/25/05, BIOS32 rev. 0 @ 0xeb520
> pcibios0 at bios0: rev 2.2 @ 0xeb520/0x4ae0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4c00/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xa800! 0xca800/0x1000 0xcb800/0x2000
> 0xdd600/0xc800!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915G/P/GV Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915G/P/GV Video" rev 0x04: aperture
> at 0xcfd00000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
> (0x4001): irq 5, address 00:16:35:79:a0:29
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
> pci3 at ppb2 bus 3
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRRW GWA-4166B, 1.03> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 5 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-60LSA0>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1 at pciide1 channel 1 drive 0: <Maxtor 6L080M0>
> wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 5
> iic0 at ichiic0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ef6d netmask ef6d ttymask ffef
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> wd1: no disk label
> dkcsum: wd1 matches BIOS drive 0x81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
