This is the same like the wiki.bsd-crew Howto (Dettus) from my initial mail. I tried 3 different Howtos (including the depenguinator) and lots of ideas i had, all with the same result: "Booting from Disk..." and then nothing more. I'm quite sure that the kernel does not boot and some posts i found confirm this, as Strato appears to have new Systems which seem to have a Bios bug (but that's still unconfirmed, i'm waiting for a reply from the Strato technicians)
Or does anybody here have OpenBSD(3.5||3.8) / FreeBSD(5.2||5.4) running on this hardware? [EMAIL PROTECTED]:~# lspci 00:01.0 PCI bridge: ServerWorks: Unknown device 0036 00:02.0 Host bridge: ServerWorks: Unknown device 0205 00:02.2 ISA bridge: ServerWorks: Unknown device 0234 00:03.0 USB Controller: ServerWorks: Unknown device 0223 (rev 01) 00:03.1 USB Controller: ServerWorks: Unknown device 0223 (rev 01) 00:03.2 USB Controller: ServerWorks: Unknown device 0223 (rev 01) 00:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 01:0d.0 PCI bridge: ServerWorks: Unknown device 0104 (rev b2) 01:0e.0 RAID bus controller: ServerWorks: Unknown device 0240 02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) [EMAIL PROTECTED]:~# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 39 model name : AMD Opteron(tm) Processor 146 stepping : 1 cpu MHz : 1996.283 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow pni bogomips : 3932.16 Greets, Chris PS. Doing the same steps (from each Howto) and run the image inside a Vmware works like a charm, so i'm quite sure i'm not totally over sleep ;) Holger Mauermann wrote: >Christian Pedaschus wrote: > > >>i'm trying since a few hours to get 3.8 on a (linux-based) root-server, >>without success. I googled some tutorials (for ex. >>http://wiki.bsd-crew.de/index.php?title=Strato-Rootserver_mit_NetBSD&redirect=no) >>but they don't seem to work >>... >>Anybody got a better way or a tutorial i missed? >> >> > >See here: http://www.dettus.net/openbsd_at_strato.txt. However, I >haven't tried that and it's a little bit outdated... > >Holger
