Michael Bibby wrote: > hi all: > > I use Marvell Yukon 88E8053 Gigabit Ethernet Controller on my laptop, but i > can't find a driver for OpenBSD 3.8, > So i want to know is there any other people use it and have a driver for it? > > thanks. > > Bibby > 2006/04/17
> I've had that chipset working with OpenBSD 3.8 and 3.9 from 2006-04-06 > (I believe that was the date) on an Asus A8N-SLI Deluxe nForce4. I > don't have the dmesg for it. I had to return that mobo for other > reasons and forgot to archive the dmesg before I reformatted. I do have > the newer version of that board, though, and it has the Marvel Yukon > 88E1011. > Here's the relevant portion from the dmesg: > skc0 at pci1 dev 12 function 0 "Marvell SKv2" rev 0x13: irq 3 > skc0: Marvell Yukon Lite (0x9) > sk0 at skc0 port A: address 00:15:f2:1d:21:6a > eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 > "Nvidia CK804 LAN" rev 0xa3 at pci0 dev 10 function 0 not configured > Based on my experience with the 88E8053 chipset on the other motherboard it seems reasonable to expect > it would work with your laptop. Are you sure? I install FreeBSD 6.0 on my laptop, the marvell.com provides driver for FreeBSD(6.0-release, and some other versions). But FreeBSD 6.0 can't found my sound card which shipped on the mainboard. What a pity. :( Yesterday, I installed NetBSD 3.0 on it, it can't found both LAN NIC and wireless, but havn't drivers for them. :( :( I havn't try OpenBSD, i checked the hardware supported list, but it is out of the list. :( :( :( so i asked at [EMAIL PROTECTED] > Have you tried booting with 3.8 > shipping or one of the 3.9 snapshots and looked through the dmesg? I will try in this week. Thanks for you answer. :) > I posted more about this mobo at > <http://marc.theaimsgroup.com/?l=openbsd-misc&m=114531096016196&w=2> > --Aaron
