It's looking good. Thanks Roman for letting me help out. Only two problems
persist:
1) we get the list twice due to the nviic detecting two iic's
2) register 0x20 is +5 VTR, which differs from the adt chip
Here are the results as of pulling down the CVS this weekend:
hw.sensors.0=adt0, +2.5Vin, 1.32 V DC
hw.sensors.1=adt0, Vccp, 1.43 V DC
hw.sensors.2=adt0, Vcc, 3.35 V DC
hw.sensors.3=adt0, +5V, 5.13 V DC
hw.sensors.4=adt0, +12V, 12.00 V DC
hw.sensors.5=adt0, Remote1 Temp, 31.00 degC
hw.sensors.6=adt0, Internal Temp, 38.00 degC
hw.sensors.7=adt0, Remote2 Temp, 33.00 degC
hw.sensors.8=adt0, TACH1, 3832 RPM
hw.sensors.9=adt0, TACH2, 2204 RPM
hw.sensors.12=adt1, +2.5Vin, 1.32 V DC
hw.sensors.13=adt1, Vccp, 1.43 V DC
hw.sensors.14=adt1, Vcc, 3.35 V DC
hw.sensors.15=adt1, +5V, 5.10 V DC
hw.sensors.16=adt1, +12V, 12.06 V DC
hw.sensors.17=adt1, Remote1 Temp, 31.00 degC
hw.sensors.18=adt1, Internal Temp, 38.00 degC
hw.sensors.19=adt1, Remote2 Temp, 33.00 degC
hw.sensors.20=adt1, TACH1, 3829 RPM
hw.sensors.21=adt1, TACH2, 2204 RPM
here's the dmesg:
OpenBSD 3.9-current (GENERIC) #26: Fri Apr 14 16:10:03 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 1073246208 (1048092K)
avail mem = 972591104 (949796K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ad) BIOS, date 02/17/05, BIOS32 rev. 0 @ 0xfa780
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcc54
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcb20/288 (16 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 17 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x1800 0xd2000/0x1600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x89
iic1 at nviic0
adt1 at iic1 addr 0x2e: sch5017 rev 0x89
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 5, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 10
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 5, nForce4
AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A103> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD360GD-00FLA2>
wd0: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <WDC WD3200KS-00PFB0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide2: using irq 11 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
"ATI Rage XL" rev 0x27 at pci1 dev 5 function 0 not configured
"VIA VT6306 FireWire" rev 0x80 at pci1 dev 6 function 0 not configured
skc0 at pci1 dev 10 function 0 "D-Link Systems DGE-530T" rev 0x11, Marvell
Yukon Lite (0x9): irq 5
sk0 at skc0 port A, address 00:15:e9:2e:28:e6
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 11, address
00:e0:81:56:8f:67
eephy1 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 1
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
irq 11, address 00:e0:81:56:8f:66
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600 GT" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48011 Hz, will use 48000 Hz
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
