Hello there.
I hope you be well, I'm trying to construct a rootfs for diskless client.
but running into issues while trying to boot it.
Following from diskless manual page, i have downloaded file sets for current
snapshot
and tar xzvf'd them. Then i have set up nfs file server, dhcp server, rarpd,
bootparamd and tftp server.
next i copied /etc/{passwd,master.passwd,group,pwd.db,login.conf} to the
client, since it lacked those.
That somewhat worked, but i dont get into login prompt, and there are some
scary messages:
stat: 10.0.0.2:/home/chara/nfs/d510/: No such file or directory
stat: 10.0.0.2:/home/chara/nfs/d510/: No such file or directory
usage: mknod [-m mode] name b|c major minor
mknod [-m mode] name p
usage: mknod [-m mode] name b|c major minor
mknod [-m mode] name p
ttyflags: setttyent: No such file or directory.
Thanks a lot in advance. :-)
Posted below are boot sequence of the diskless machine and configuration after
that:
host's dmesg:
OpenBSD 7.9 (GENERIC.MP) #3: Mon Jun 22 22:43:28 +0330 2026
[email protected]:/sys/arch/amd64/compile/GENERIC.MP
real mem = 12235759616 (11668MB)
avail mem = 11839213568 (11290MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x9b9a2000 (76 entries)
bios0: vendor HP version "N01 Ver. 02.60" date 12/15/2022
bios0: HP HP EliteDesk 800 G2 SFF
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT TCPA SSDT TPM2 UEFI SSDT MSDM SLIC WSMT HPET APIC
MCFG SSDT SSDT SSDT DMAR ASF! FPDT BGRT
acpi0: wakeup devices PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) PEG0(S4) PEGP(S4)
PS2K(S3) PS2M(S3) GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3192.56 MHz, 06-5e-03, patch
000000f0
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT,PTS> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT>
edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=8, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
4-way L2 cache, 6MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0, type P
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3192.56 MHz, 06-5e-03, patch
000000f0
cpu1: smt 0, core 1, package 0, type P
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3192.56 MHz, 06-5e-03, patch
000000f0
cpu2: smt 0, core 2, package 0, type P
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, 3192.56 MHz, 06-5e-03, patch
000000f0
cpu3: smt 0, core 3, package 0, type P
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus -1 (PEG0)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus 1 (RP06)
acpiprt10 at acpi0: bus 2 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus 3 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus -1 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpiec0 at acpi0: not present
acpiec1 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"HPQ8001" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0A06" at acpi0 not configured
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG01, resource for PEG1
acpipwrres1 at acpi0: PG02, resource for PEG2
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: PG00, resource for PEG0
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: WRST
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3000, 2900, 2700, 2500,
2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, SKYLAKE, gen 9
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x31: ports: 16 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI
1.3.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 6.0Gb/s
ahci0: PHY offline on port 3
ahci0: PHY offline on port 5
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BUCT-6, 01.0> naa.50014ee65bc480da
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, TOSHIBA MQ01ACF0, AV0A> naa.5000039911781bcb
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, HGST HTS725050A7, GH2Z> naa.5000cca76cd6f2b3
sd2: 476940MB, 512 bytes/sector, 976773168 sectors
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "D-Link DGE-528T" rev 0x06: RTL8168E/8111E
(0x2c00), msi, address c4:12:f5:33:e8:e8
rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 4
ppb1 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q170 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
azalia0: codecs: Realtek ALC221, Intel/0x2809, using Realtek ALC221
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int
16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address
c8:d3:ff:b7:e7:a0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Holtek USB Keyboard" rev
1.10/3.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Holtek USB Keyboard" rev
1.10/3.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 4 usages, 4 keys, array
wskbd2 at ucc0 mux 1
uhub1 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev
2.10/6.63 addr 3
uplcom0 at uhub1 port 1 configuration 1 interface 0 "Prolific Technology Inc.
USB-Serial Controller D" rev 1.10/4.00 addr 4
ucom0 at uplcom0: usb0.2.00001.0
run0 at uhub1 port 2 configuration 1 interface 0 "Ralink 11n Adapter" rev
2.00/1.01 addr 5
run0: MAC/BBP RT5390 (rev 0x0503), RF RT5370 (MIMO 1T1R), address
c4:a8:1d:00:84:4c
uplcom1 at uhub1 port 4 configuration 1 interface 0 "Prolific Technology Inc.
USB-Serial Controller" rev 1.10/4.00 addr 6
ucom1 at uplcom1: usb0.2.00004.0
uvideo0 at uhub0 port 6 configuration 1 interface 0 "A4 TECH A4 TECH USB2.0 PC
Camera J" rev 2.00/1.00 addr 7
video0 at uvideo0
uaudio0 at uhub0 port 6 configuration 1 interface 3 "A4 TECH A4 TECH USB2.0 PC
Camera J" rev 2.00/1.00 addr 7
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio1 at uaudio0
uhub2 at uhub0 port 18 configuration 1 interface 0 "GenesysLogic USB3.1 Hub"
rev 3.20/6.63 addr 8
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (f6b21a8db95e073c.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
host configuration:
[~]$ cat /etc/ethers
70:71:bc:4a:9e:a6 d510
[~]$ cat /etc/hosts
127.0.0.1 localhost
::1 localhost
10.0.0.2 hp
10.0.0.3 x230
10.0.0.5 d510
10.0.0.6 rpi0
10.0.0.52 kindle
[~]$ cat /etc/dhcpd.conf
# $OpenBSD: dhcpd.conf,v 1.1 2014/07/11 21:20:10 deraadt Exp $
#
# DHCP server options.
# See dhcpd.conf(5) and dhcpd(8) for more information.
#
option domain-name-servers 1.1.1.1;
subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.800 10.0.0.127;
option routers 10.0.0.2;
# main devices
host belongrouter {
fixed-address 10.0.0.1;
}
host hp {
hardware ethernet fe:e1:ba:d1:e1:1c;
fixed-address 10.0.0.2;
}
host d510 {
hardware ethernet 70:71:bc:4a:9e:a6;
filename "openbsd-pxeboot";
option root-path "/home/chara/nfs/d510";
fixed-address 10.0.0.5;
}
}
[~]$ cat /etc/bootparams
d510 root=10.0.0.2:/home/chara/nfs/d510/ \
swap=10.0.0.2:/home/chara/nfs/d510/swap \
dump=10.0.0.2:/home/chara/nfs/d510/swap
[~]$ cat /etc/exports
/mnt/other -alldirs -network=10.0.0.0 -mask=255.255.255.0
/home/chara/vmm/testbed/ -alldirs -maproot=0:0 -network=10.0.0.0
-mask=255.255.255.0
/home/chara/nfs/d510/ -alldirs -maproot=0:0 -network=10.0.0.0
-mask=255.255.255.0
/home/ -alldirs -maproot=root:wheel -network=10.0.0.0
-mask=255.255.255.0
[~]$ ifconfig vport0
vport0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d1:d9:6d
index 9 priority 0 llprio 3
groups: vport egress
inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
[~]$ ifconfig em0
em0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
1500
lladdr c8:d3:ff:b7:e7:a0
index 2 priority 0 llprio 3
media: Ethernet autoselect (1000baseT
full-duplex,master,rxpause,txpause)
status: active
[~]$ ifconfig veb0
veb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
index 8 llprio 3
encap: vnetid 1 txprio packet rxprio outer
groups: veb
em0 flags=3<LEARNING,DISCOVER>
port 2 ifpriority 0 ifcost 0 untagged 1
tagged: none
vport0 flags=3<LEARNING,DISCOVER>
port 9 ifpriority 0 ifcost 0 untagged 1
vport1 flags=3<LEARNING,DISCOVER>
port 10 ifpriority 0 ifcost 0 untagged 1
tap0 flags=3<LEARNING,DISCOVER>
port 6 ifpriority 0 ifcost 0 untagged 1
tagged: none
Addresses (max cache: 100, timeout: 240):
70:71:bc:4a:9e:a6@1 em0 7 flags=0<>
ac:fd:ce:f0:c4:7c@1 em0 27 flags=0<>
ec:be:dd:48:72:3f@1 em0 3 flags=0<>
fe:e1:ba:d1:d9:6d@1 vport0 3 flags=0<>
client configuration:
[~]$ cat ~/nfs/d510/etc/fstab
#1.0.0.2:/home/chara/nfs/d510/ / nfs rw 0 0
10.0.0.2:/home/chara/nfs/src/current /usr/src nfs rw 0 0
[~]$ cat ~/nfs/tftp/etc/boot.conf
time
echo tty pc0 -> com0
stty com0 115200
set tty com0
time
client's boot process:
[~]$ cu -l cuaU1 -s 115200
Connected to /dev/cuaU1 (speed 115200)
>> OpenBSD/amd64 PXEBOOT 3.65
Tue Jul 7 14:00:32 2026
boot>
booting tftp:/bsd: 23164853+4822032+459968+0+1392640
[2104222+128+1570080+1265157]=0x212d348
pxe_netif_open: PXENV_UDP_OPEN failed: 0x60
net_open: netif_open() failed
entry point at 0xffffffff81001000
[ using 4940616 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2026 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.9-current (GENERIC.MP) #9: Tue Jun 30 20:56:36 MDT 2026
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3186348032 (3038MB)
avail mem = 3068063744 (2925MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe43c0 (27 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date
03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4)
PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1662.81 MHz, 06-1c-0a, patch
00000107
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=40e31d<SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
cpu0: cpuid 80000001 edx=20100800<NXE,LONG> ecx=1<LAHF>
cpu0: MELTDOWN
cpu0: 512KB 64b/line 8-way L2 cache
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1662.93 MHz, 06-1c-0a, patch
00000107
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1662.84 MHz, 06-1c-0a, patch
00000107
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1662.97 MHz, 06-1c-0a, patch
00000107
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpibtn0 at acpi0: SLPB(wakeup)
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
com1 at acpi0 UAR1 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
com0 at acpi0 UAR2 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
"PNP0003" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
acpicpu3 at acpi0: C1(@1 halt!), PSS
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 8 int 16, PINEVIEW, gen 3
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
msi, address 70:71:bc:4a:9e:a6
rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay at vga0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
re0: restrict all mbufs to low memory
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
PXE boot MAC address 70:71:bc:4a:9e:a6, interface re0
nfs_boot: using interface re0, with revarp & bootparams
nfs_boot: client_addr=10.0.0.5
nfs_boot: server_addr=10.0.0.2 hostname=d510
root on 10.0.0.2:/home/chara/nfs/d510/
swap on 10.0.0.2:/home/chara/nfs/d510/swap
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1
pckbd_enable: command error
wsdisplay0: screen 0-5 added (std, vt100 emulation)
Automatic boot in progress: starting file system checks.
stat: 10.0.0.2:/home/chara/nfs/d510/: No such file or directory
stat: 10.0.0.2:/home/chara/nfs/d510/: No such file or directory
stat: 10.0.0.2:/home/chara/nfs/d510/: No such file or directory
usage: mknod [-m mode] name b|c major minor
mknod [-m mode] name p
usage: mknod [-m mode] name b|c major minor
mknod [-m mode] name p
ttyflags: setttyent: No such file or directory
pf enabled
starting network
starting early daemons: syslogd pflogd ntpd(failed).
starting RPC daemons:.
mount: realpath /usr/src: No such file or directory
savecore: no core dump (no dumpdev)
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd(failed) smtpd(failed) sndiod.
starting local daemons: cron.
Tue Jul 7 14:01:56 UTC 2026
--
chara <[email protected]>
