On Tue, Apr 04, 2006 at 05:01:21PM -0700, Smith wrote:
> I bought a new 1U server with an Intel SE7221BK-1E Entry Server Board, a
> LSI MegaRAID Sata 150-4D SER523 REV B2 card, and two Seagate Barracuda
> 400 GBytes hard drives.
>
> Problem:
>
> When I install OpenBSD 3.8, and I get to the part that says:
>
> Proceed with install? [no]
>
> I type "y" and I get:
>
> No disks found
>
> Is there anything I can do at this point?
>
> Below is my dmesg:
>
> OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
> real mem = 1064824832 (1039868K)
> avail mem = 966029312 (943388K)
> using 4278 buffers containing 53342208 bytes (52092K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 04/19/05, BIOS32 rev. 0 @ 0xf0010
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf54a0/240 (13 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2640
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x9400! 0xc9800/0x1000 0xca800/0x2200
> 0xcd000/0x1000 0xce000/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
> vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci2 at ppb1 bus 4
> ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 3
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5
> ehci0: timed out waiting for BIOS
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
> pci4 at ppb3 bus 2
> em0 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq
> 3, address: 00:0e:0c:4b:73:ea
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVD SOHD-16P9SV, F$01> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA,
> channel 0 wired to native-PCI, channel 1 wired to compatibility
> pciide1: using irq 11 for native-PCI interrupt
> pciide1: couldn't map channel 1 cmd regs
> "Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ffed netmask ffed ttymask ffef
> rd0: fixed, 3800 blocks
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> fd0: timeout (st0 20<seek_cmplt> cyl 0)
> fd0a: soft error reading fsbn 0
>
Are you using floppyB, which supports RAID controllers?
http://www.openbsd.org/faq/faq4.html#MkInsMedia
- David
