On Tue, Apr 04, 2006 at 07:50:15PM +0000, Didier Wiroth wrote: > Here is my pppd gprs script (this script works with the siemens card):
I've noticed that the options I had to use with the Siemens Connect2Air card differed from what I had to use with the 3G cards I used. For use with the german telco e-plus I had to add various options to the pppd option file that change the behaviour in ip negotiation. > Here is the gprs chat script (it works with the siemens card). that it works with the siemens card does not mean anything. While most of the cards have generally a set of commands that is the same across all of them (AT+CPIN, AT+CGDCONT), some of them have a subset to their own. I see you've added "debug" to the pppd option file, have you enabled the debugging to the logfile in syslog as well (pppd(8) explains that). Your syslogd.conf should be configured to log daemon.debug as well, otherwise the output that "debug" triggers is not logged to /var/log/messages. (if this would be the case, there would be lots more debugging output). felix -- GPG/PGP: D9AC74D0 / 076E 1E87 3E05 1C7F B1A0 8A48 0D31 9BD3 D9AC 74D0 http://hazardous.org/~fkr - [EMAIL PROTECTED] - [EMAIL PROTECTED]|irc - FKR-RIPE https://www.bytemine.net/ - bytemine - BSD based hosting/solutions/ideas
