My graphics card broke and I changed it with a hand-me-down.
GeForce GTX 1080 DUKE
If I am reading the correct man page <https://man.openbsd.org/man4/nv.4> and
understand it correctly this card is not listed as supported. As far as I can
tell videos in firefox and a .webm video with a resolution of 3840x2160 play
fine. I haven't tried any gaming or 3D graphics.
Not sure if you wanted to update the man page as one would get the impression
to not even try this board.
Below is the Xorg.0.log file and dmesg.
Jon
[ 13.656] (WW) checkDevMem: failed to open /dev/mem and /dev/xf86
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 13.656] linear framebuffer access unavailable
[ 13.664] (--) Using wscons driver on /dev/ttyC4
[ 13.673]
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[ 13.673] Current Operating System: OpenBSD ryzen.jonjfineman.com 7.8
GENERIC.MP#6 amd64
[ 13.673]
[ 13.673] Current version of pixman: 0.46.4
[ 13.674] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.674] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 28 08:29:57
2026
[ 13.675] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 13.676] (==) No Layout section. Using the first Screen section.
[ 13.676] (==) No screen section available. Using defaults.
[ 13.676] (**) |-->Screen "Default Screen Section" (0)
[ 13.676] (**) | |-->Monitor "<default monitor>"
[ 13.676] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.677] (**) Allowing byte-swapped clients
[ 13.677] (==) Automatically adding devices
[ 13.677] (==) Automatically enabling devices
[ 13.677] (==) Not automatically adding GPU devices
[ 13.677] (==) Automatically binding GPU devices
[ 13.677] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.679] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 13.679] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 13.679] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 13.679] (II) Loader magic: 0x9f93526fa10
[ 13.679] (II) Module ABI versions:
[ 13.679] X.Org ANSI C Emulation: 0.4
[ 13.679] X.Org Video Driver: 25.2
[ 13.679] X.Org XInput driver : 24.4
[ 13.679] X.Org Server Extension : 10.0
[ 13.679] (--) PCI:*(10@0:0:0) 10de:1b80:1462:3369 rev 161, Mem @
0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @
0x0000e000/128
[ 13.680] (II) LoadModule: "glx"
[ 13.681] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 13.726] (II) Module glx: vendor="X.Org Foundation"
[ 13.726] compiled for 1.21.1.18, module version = 1.0.0
[ 13.726] ABI class: X.Org Server Extension, version 10.0
[ 13.726] (==) Matched wsfb as autoconfigured driver 0
[ 13.726] (==) Assigned the driver to the xf86ConfigLayout
[ 13.726] (II) LoadModule: "wsfb"
[ 13.727] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[ 13.727] (II) Module wsfb: vendor="X.Org Foundation"
[ 13.727] compiled for 1.21.1.18, module version = 0.4.1
[ 13.727] ABI class: X.Org Video Driver, version 25.2
[ 13.727] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 13.727] (WW) Falling back to old probe method for wsfb
[ 13.727] (II) wsfb(0): using default device
[ 13.727] (II) wsfb(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.727] (==) wsfb(0): Depth 24, (--) framebuffer bpp 32
[ 13.727] (==) wsfb(0): RGB weight 888
[ 13.727] (==) wsfb(0): Default visual is TrueColor
[ 13.727] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.727] (II) wsfb(0): Vidmem: 8100k
[ 13.728] (==) wsfb(0): DPI set to (96, 96)
[ 13.728] (**) wsfb(0): Using "Shadow Framebuffer"
[ 13.728] (II) Loading sub module "shadow"
[ 13.728] (II) LoadModule: "shadow"
[ 13.729] (II) Loading /usr/X11R6/lib/modules/libshadow.so
[ 13.729] (II) Module shadow: vendor="X.Org Foundation"
[ 13.729] compiled for 1.21.1.18, module version = 1.1.0
[ 13.729] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.729] (II) Loading sub module "fb"
[ 13.729] (II) LoadModule: "fb"
[ 13.729] (II) Module "fb" already built-in
[ 13.731] (==) wsfb(0): Backing store enabled
[ 13.733] (II) Initializing extension Generic Event Extension
[ 13.733] (II) Initializing extension SHAPE
[ 13.733] (II) Initializing extension MIT-SHM
[ 13.734] (II) Initializing extension XInputExtension
[ 13.734] (II) Initializing extension XTEST
[ 13.735] (II) Initializing extension BIG-REQUESTS
[ 13.735] (II) Initializing extension SYNC
[ 13.735] (II) Initializing extension XKEYBOARD
[ 13.736] (II) Initializing extension XC-MISC
[ 13.736] (II) Initializing extension SECURITY
[ 13.736] (II) Initializing extension XFIXES
[ 13.737] (II) Initializing extension RENDER
[ 13.737] (II) Initializing extension RANDR
[ 13.737] (II) Initializing extension COMPOSITE
[ 13.738] (II) Initializing extension DAMAGE
[ 13.738] (II) Initializing extension MIT-SCREEN-SAVER
[ 13.739] (II) Initializing extension DOUBLE-BUFFER
[ 13.739] (II) Initializing extension RECORD
[ 13.739] (II) Initializing extension DPMS
[ 13.739] (II) Initializing extension Present
[ 13.740] (II) Initializing extension DRI3
[ 13.740] (II) Initializing extension X-Resource
[ 13.740] (II) Initializing extension XVideo
[ 13.741] (II) Initializing extension XVideo-MotionCompensation
[ 13.741] (II) Initializing extension GLX
[ 13.741] (II) AIGLX: Screen 0 is not DRI2 capable
[ 13.752] (II) IGLX: Loaded and initialized swrast
[ 13.752] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 13.752] (II) Initializing extension XFree86-VidModeExtension
[ 13.753] (II) Initializing extension XFree86-DGA
[ 13.753] (II) Initializing extension XFree86-DRI
[ 13.753] (II) Initializing extension DRI2
[ 13.807] (II) config/wscons: checking input device /dev/wskbd
[ 13.807] (II) wskbd: using layout us
[ 13.807] (II) LoadModule: "kbd"
[ 13.808] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 13.808] (II) Module kbd: vendor="X.Org Foundation"
[ 13.808] compiled for 1.21.1.18, module version = 2.0.0
[ 13.808] Module class: X.Org XInput Driver
[ 13.808] ABI class: X.Org XInput driver, version 24.4
[ 13.808] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 13.808] (**) /dev/wskbd: always reports core events
[ 13.808] (**) /dev/wskbd: always reports core events
[ 13.808] (**) Option "Protocol" "standard"
[ 13.809] (**) Option "XkbRules" "base"
[ 13.809] (**) Option "XkbModel" "pc105"
[ 13.809] (**) Option "XkbLayout" "us"
[ 13.809] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 14.006] (II) config/wscons: checking input device /dev/wsmouse
[ 14.006] (II) LoadModule: "ws"
[ 14.006] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 14.007] (II) Module ws: vendor="X.Org Foundation"
[ 14.007] compiled for 1.21.1.18, module version = 1.3.0
[ 14.007] Module class: X.Org XInput Driver
[ 14.007] ABI class: X.Org XInput driver, version 24.4
[ 14.007] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 14.007] (**) /dev/wsmouse: always reports core events
[ 14.007] (II) ws: /dev/wsmouse: debuglevel 0
[ 14.007] (**) Option "Device" "/dev/wsmouse"
[ 14.007] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 14.007] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 14.007] (**) ws: /dev/wsmouse: associated screen: 0
[ 14.008] (II) ws: /dev/wsmouse: minimum x position: 0
[ 14.008] (II) ws: /dev/wsmouse: maximum x position: 1919
[ 14.008] (II) ws: /dev/wsmouse: minimum y position: 0
[ 14.008] (II) ws: /dev/wsmouse: maximum y position: 1079
[ 14.008] (==) ws: /dev/wsmouse: Buttons: 7
[ 14.010] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 14.010] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[ 14.012] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 14.012] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 14.012] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 14.012] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 14.012] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 18.048] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 42.725] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 42.765] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 42.816] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 43.142] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 59.637] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 657.290] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 657.290] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 657.291] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 1465.493] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 1465.493] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 1465.493] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 1713.770] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 1713.770] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 1713.770] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 5885.271] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 5885.271] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 5885.272] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 19186.270] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 19186.271] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 19186.271] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
[ 20260.367] ioctl FBIOGETCMAP: Inappropriate ioctl for device
[ 20260.367] ioctl FBIOPUTCMAP: Inappropriate ioctl for device
[ 20260.367] (EE) wsfb(0): error in WSDISPLAY_SVIDEO Operation not supported
OpenBSD 7.8 (GENERIC.MP) #6: Fri Mar 20 10:18:39 MDT 2026
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34253340672 (32666MB)
avail mem = 33188106240 (31650MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0xe6cc0 (23 entries)
bios0: vendor American Megatrends Inc. version "P6.00" date 08/06/2019
bios0: ASRock AB350 Gaming-ITX/ac
efi0 at bios0: UEFI 2.7
efi0: American Megatrends rev 0x5000e
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT MCFG AAFT HPET SSDT UEFI
BGRT SSDT CRAT CDIT SSDT SSDT WSMT
acpi0: wakeup devices GPP0(S4) GPP1(S4) GPP3(S4) GPP4(S4) GPP5(S4) GPP6(S4)
GPP7(S4) GPP8(S4) GPP9(S4) GPPA(S4) GPPB(S4) GPPC(S4) GPPD(S4) GPPE(S4)
GPPF(S4) GP17(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu0: cpuid 1
edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT>
ecx=76d8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ>
cpu0: cpuid 7.0
ebx=209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG>
ecx=35c233ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX>
cpu0: cpuid 80000007 edx=6599<HWPSTATE,ITSC>
cpu0: cpuid 80000008 ebx=1007<IBPB>
cpu0: cpuid 8000001F eax=7<SME,SEV,PFLUSH_MSR> ecx=f
cpu0: 32KB 64b/line 8-way D-cache, 64KB 64b/line 4-way I-cache, 512KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 8 (application processor)
cpu3: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu3: smt 0, core 4, package 0
cpu4 at mainbus0: apid 10 (application processor)
cpu4: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu4: smt 0, core 5, package 0
cpu5 at mainbus0: apid 12 (application processor)
cpu5: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu5: smt 0, core 6, package 0
cpu6 at mainbus0: apid 1 (application processor)
cpu6: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu6: smt 1, core 0, package 0
cpu7 at mainbus0: apid 3 (application processor)
cpu7: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu7: smt 1, core 1, package 0
cpu8 at mainbus0: apid 5 (application processor)
cpu8: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch 08001138
cpu8: smt 1, core 2, package 0
cpu9 at mainbus0: apid 9 (application processor)
cpu9: AMD Ryzen 5 1600 Six-Core Processor, 3200.01 MHz, 17-01-01, patch 08001138
cpu9: smt 1, core 4, package 0
cpu10 at mainbus0: apid 11 (application processor)
cpu10: AMD Ryzen 5 1600 Six-Core Processor, 3200.00 MHz, 17-01-01, patch
08001138
cpu10: smt 1, core 5, package 0
cpu11 at mainbus0: apid 13 (application processor)
cpu11: AMD Ryzen 5 1600 Six-Core Processor, 3200.01 MHz, 17-01-01, patch
08001138
cpu11: smt 1, core 6, package 0
ioapic0 at mainbus0: apid 13 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 14 pa 0xfec01000, version 21, 32 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (GPP0)
acpiprt2 at acpi0: bus -1 (GPP1)
acpiprt3 at acpi0: bus -1 (GPP3)
acpiprt4 at acpi0: bus -1 (GPP4)
acpiprt5 at acpi0: bus -1 (GPP5)
acpiprt6 at acpi0: bus -1 (GPP6)
acpiprt7 at acpi0: bus -1 (GPP7)
acpiprt8 at acpi0: bus 10 (GPP8)
acpiprt9 at acpi0: bus -1 (GPP9)
acpiprt10 at acpi0: bus -1 (GPPA)
acpiprt11 at acpi0: bus -1 (GPPB)
acpiprt12 at acpi0: bus -1 (GPPC)
acpiprt13 at acpi0: bus -1 (GPPD)
acpiprt14 at acpi0: bus -1 (GPPE)
acpiprt15 at acpi0: bus -1 (GPPF)
acpiprt16 at acpi0: bus 11 (GP17)
acpiprt17 at acpi0: bus 12 (GP18)
acpiprt18 at acpi0: bus 2 (GPP2)
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x400 irq 7, 184 pins
"AMDIF030" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu1 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu2 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu3 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu4 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu5 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu6 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu7 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu8 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu9 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414), C1(@1
halt!), PSS
acpicpu10 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414),
C1(@1 halt!), PSS
acpicpu11 at acpi0: C1 bad (state 1 has no substates): C2(0@400 io@0x414),
C1(@1 halt!), PSS
cpu0: 3200 MHz: speeds: 3200 2800 1550 MHz
pci0 at mainbus0 bus 0
ksmn0 at pci0 dev 0 function 0 "AMD 17h Root Complex" rev 0x00
pchb0 at pci0 dev 1 function 0 "AMD 17h PCIE" rev 0x00
ppb0 at pci0 dev 1 function 1 "AMD 17h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 "Samsung PM9A1" rev 0x00: msix, NVMe 1.3
nvme0: Samsung SSD 980 PRO 1TB, firmware 5B2QGXA7, serial S5P2NL0T902215R
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 980, 5B2Q>
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
ppb1 at pci0 dev 1 function 3 "AMD 17h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
xhci0 at pci2 dev 0 function 0 "AMD 300 Series xHCI" rev 0x02: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
ahci0 at pci2 dev 0 function 1 "AMD 300 Series SATA" rev 0x02: msi, AHCI 1.3.1
scsibus2 at ahci0: 32 targets
ppb2 at pci2 dev 0 function 2 vendor "AMD", unknown product 0x43b2 rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
ppb4 at pci3 dev 1 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci5 at ppb4 bus 5
ppb5 at pci3 dev 4 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci6 at ppb5 bus 6
ppb6 at pci3 dev 5 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci7 at ppb6 bus 7
ppb7 at pci3 dev 6 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci8 at ppb7 bus 8
iwm0 at pci8 dev 0 function 0 "Intel Dual Band Wireless-AC 3168" rev 0x10, msi
ppb8 at pci3 dev 7 function 0 "AMD 300 Series PCIE" rev 0x02: msi
pci9 at ppb8 bus 9
em0 at pci9 dev 0 function 0 "Intel I211" rev 0x03: msi, address
70:85:c2:86:64:7d
pchb1 at pci0 dev 2 function 0 "AMD 17h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD 17h PCIE" rev 0x00
ppb9 at pci0 dev 3 function 1 "AMD 17h PCIE" rev 0x00: msi
pci10 at ppb9 bus 10
vendor "NVIDIA", unknown product 0x1b80 (class display subclass VGA, rev 0xa1)
at pci10 dev 0 function 0 not configured
azalia0 at pci10 dev 0 function 1 vendor "NVIDIA", unknown product 0x10f0 rev
0xa1: msi
azalia0: no supported codecs
pchb3 at pci0 dev 4 function 0 "AMD 17h PCIE" rev 0x00
pchb4 at pci0 dev 7 function 0 "AMD 17h PCIE" rev 0x00
ppb10 at pci0 dev 7 function 1 "AMD 17h PCIE" rev 0x00
pci11 at ppb10 bus 11
vendor "AMD", unknown product 0x145a (class instrumentation unknown subclass
0x00, rev 0x00) at pci11 dev 0 function 0 not configured
ccp0 at pci11 dev 0 function 2 "AMD 17h Crypto" rev 0x00
xhci1 at pci11 dev 0 function 3 "AMD 17h xHCI" rev 0x00: msi, xHCI 1.0
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
addr 1
pchb5 at pci0 dev 8 function 0 "AMD 17h PCIE" rev 0x00
ppb11 at pci0 dev 8 function 1 "AMD 17h PCIE" rev 0x00
pci12 at ppb11 bus 12
vendor "AMD", unknown product 0x1455 (class instrumentation unknown subclass
0x00, rev 0x00) at pci12 dev 0 function 0 not configured
ahci1 at pci12 dev 0 function 2 "AMD FCH AHCI" rev 0x51: msi, AHCI 1.3.1
scsibus3 at ahci1: 32 targets
azalia1 at pci12 dev 0 function 3 "AMD 17h HD Audio" rev 0x00: msi
azalia1: codecs: Realtek ALC1220
audio0 at azalia1
piixpm0 at pci0 dev 20 function 0 "AMD FCH SMBus" rev 0x59: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 16GB DDR4 SDRAM PC4-21300
spdmem1 at iic0 addr 0x51: 16GB DDR4 SDRAM PC4-21300
iic1 at piixpm0
pcib0 at pci0 dev 20 function 3 "AMD FCH LPC" rev 0x51
pchb6 at pci0 dev 24 function 0 "AMD 17h Data Fabric" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD 17h Data Fabric" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD 17h Data Fabric" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD 17h Data Fabric" rev 0x00
pchb10 at pci0 dev 24 function 4 "AMD 17h Data Fabric" rev 0x00
pchb11 at pci0 dev 24 function 5 "AMD 17h Data Fabric" rev 0x00
pchb12 at pci0 dev 24 function 6 "AMD 17h Data Fabric" rev 0x00
pchb13 at pci0 dev 24 function 7 "AMD 17h Data Fabric" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6792D rev 0x11
lm1 at wbsio0 port 0x290/8: NCT6792D
vmm0 at mainbus0: SVM/RVI
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhidev0 at uhub0 port 5 configuration 1 interface 0 "Keychron Keychron C2" rev
2.00/1.04 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1 "Keychron Keychron C2" rev
2.00/1.04 addr 2
uhidev1: iclass 3/1, 3 report ids
ukbd1 at uhidev1 reportid 1: 120 variable keys, 0 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 3: 829 usages, 20 keys, array
wskbd3 at ucc0 mux 1
wskbd3: connecting to wsdisplay0
uhidev2 at uhub0 port 6 configuration 1 interface 0 "SINOWEALTH Game Mouse" rev
1.10/1.00 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub0 port 6 configuration 1 interface 1 "SINOWEALTH Game Mouse" rev
1.10/1.00 addr 3
uhidev3: iclass 3/1, 8 report ids
ukbd2 at uhidev3 reportid 1: 8 variable keys, 6 key codes
wskbd4 at ukbd2 mux 1
wskbd4: connecting to wsdisplay0
ucc1 at uhidev3 reportid 2: 24 usages, 13 keys, enum
wskbd5 at ucc1 mux 1
wskbd5: connecting to wsdisplay0
uhid1 at uhidev3 reportid 4: input=0, output=0, feature=58
uhid2 at uhidev3 reportid 5: input=0, output=0, feature=5
uhid3 at uhidev3 reportid 6: input=0, output=0, feature=255
uhid4 at uhidev3 reportid 7: input=4, output=0, feature=0
uhid5 at uhidev3 reportid 8: input=0, output=0, feature=8
ugen0 at uhub0 port 10 "Intel Bluetooth" rev 2.00/0.01 addr 4
uhidev4 at uhub0 port 14 configuration 1 interface 0 "American Power Conversion
Back-UPS ES 600M1 FW:928.a9 .D USB FW:a9" rev 2.00/0.90 addr 5
uhidev4: iclass 3/0, 128 report ids
upd0 at uhidev4
uhid6 at uhidev4 reportid 1: input=0, output=0, feature=1
uhid7 at uhidev4 reportid 2: input=0, output=0, feature=1
uhid8 at uhidev4 reportid 3: input=0, output=0, feature=1
uhid9 at uhidev4 reportid 4: input=0, output=0, feature=1
uhid10 at uhidev4 reportid 5: input=0, output=0, feature=1
uhid11 at uhidev4 reportid 6: input=3, output=0, feature=3
uhid12 at uhidev4 reportid 7: input=0, output=0, feature=2
uhid13 at uhidev4 reportid 8: input=0, output=0, feature=2
uhid14 at uhidev4 reportid 9: input=0, output=0, feature=2
uhid15 at uhidev4 reportid 10: input=0, output=0, feature=1
uhid16 at uhidev4 reportid 11: input=0, output=0, feature=1
uhid17 at uhidev4 reportid 12: input=3, output=0, feature=3
uhid18 at uhidev4 reportid 13: input=0, output=0, feature=1
uhid19 at uhidev4 reportid 14: input=0, output=0, feature=1
uhid20 at uhidev4 reportid 15: input=0, output=0, feature=1
uhid21 at uhidev4 reportid 16: input=0, output=0, feature=1
uhid22 at uhidev4 reportid 17: input=0, output=0, feature=1
uhid23 at uhidev4 reportid 18: input=0, output=0, feature=1
uhid24 at uhidev4 reportid 21: input=0, output=0, feature=2
uhid25 at uhidev4 reportid 23: input=0, output=0, feature=2
uhid26 at uhidev4 reportid 24: input=0, output=0, feature=1
uhid27 at uhidev4 reportid 28: input=0, output=0, feature=3
uhid28 at uhidev4 reportid 32: input=0, output=0, feature=2
uhid29 at uhidev4 reportid 33: input=1, output=0, feature=1
uhid30 at uhidev4 reportid 34: input=0, output=0, feature=1
uhid31 at uhidev4 reportid 35: input=0, output=0, feature=2
uhid32 at uhidev4 reportid 36: input=0, output=0, feature=2
uhid33 at uhidev4 reportid 37: input=0, output=0, feature=2
uhid34 at uhidev4 reportid 38: input=0, output=0, feature=2
uhid35 at uhidev4 reportid 39: input=0, output=0, feature=2
uhid36 at uhidev4 reportid 40: input=0, output=0, feature=4
uhid37 at uhidev4 reportid 48: input=0, output=0, feature=1
uhid38 at uhidev4 reportid 49: input=0, output=0, feature=2
uhid39 at uhidev4 reportid 50: input=0, output=0, feature=2
uhid40 at uhidev4 reportid 51: input=0, output=0, feature=2
uhid41 at uhidev4 reportid 52: input=0, output=0, feature=2
uhid42 at uhidev4 reportid 53: input=0, output=0, feature=1
uhid43 at uhidev4 reportid 54: input=0, output=0, feature=1
uhid44 at uhidev4 reportid 64: input=0, output=0, feature=1
uhid45 at uhidev4 reportid 65: input=0, output=0, feature=2
uhid46 at uhidev4 reportid 66: input=0, output=0, feature=2
uhid47 at uhidev4 reportid 80: input=0, output=0, feature=1
uhid48 at uhidev4 reportid 81: input=0, output=0, feature=1
uhid49 at uhidev4 reportid 82: input=0, output=0, feature=2
uhid50 at uhidev4 reportid 96: input=0, output=0, feature=2
uhid51 at uhidev4 reportid 97: input=0, output=0, feature=1
uhid52 at uhidev4 reportid 98: input=0, output=0, feature=4
uhid53 at uhidev4 reportid 116: input=0, output=0, feature=4
uhid54 at uhidev4 reportid 117: input=0, output=0, feature=2
uhid55 at uhidev4 reportid 120: input=0, output=0, feature=1
uhid56 at uhidev4 reportid 121: input=0, output=0, feature=1
uhid57 at uhidev4 reportid 122: input=0, output=0, feature=4
uhid58 at uhidev4 reportid 123: input=0, output=0, feature=2
uhid59 at uhidev4 reportid 124: input=0, output=0, feature=1
uhid60 at uhidev4 reportid 125: input=0, output=0, feature=1
uhid61 at uhidev4 reportid 126: input=0, output=0, feature=1
uhid62 at uhidev4 reportid 127: input=0, output=0, feature=1
uhid63 at uhidev4 reportid 128: input=0, output=0, feature=1
uhub1: device problem, disabling port 4
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (d860753e7eb73bef.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x220, fw ver 29.198743027.0, address 38:de:ad:17:18:9e
uhub1: device problem, disabling port 1
uhub1: device problem, disabling port 1
uhub1: device problem, disabling port 1
uhub1: port 1, set config 0 at addr 2 failed
uhub1: device problem, disabling port 1
uslcom0 at uhub1 port 1 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00001.0
ucom0 detached
uslcom0 detached
uhub1: device problem, disabling port 1
uhub1: device problem, disabling port 1
uslcom0 at uhub1 port 1 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00001.0
ucom0 detached
uslcom0 detached
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: port 4, set config 0 at addr 2 failed
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uhub1: device problem, disabling port 4
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uslcom0 at uhub1 port 4 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00004.0
ucom0 detached
uslcom0 detached
uslcom0 at uhub1 port 3 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00003.0
ucom0 detached
uslcom0 detached
uhub1: port 3, set config 0 at addr 2 failed
uhub1: device problem, disabling port 3
uhub1: device problem, disabling port 3
uslcom0 at uhub1 port 3 configuration 1 interface 0 "Silicon Labs CP2104 USB to UART
Bridge Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0: usb1.0.00003.0
ucom0 detached
uslcom0 detached
uslcom0 at uhub0 port 11 configuration 1 interface 0 "Silicon Labs CP2104 USB to
UART Bridge Controller" rev 2.00/1.00 addr 6
ucom0 at uslcom0 portno 0: usb0.0.0000b.0
