Hi, I'm using a nc6000 laptop since 3.8 and now I'm running 3.9-stable on it. Apm does indeed not recognize the battery status but I did not have a panic.
I'm running the F.14 bios from: http://h18007.www1.hp.com/support/files/hpcpqnk/us/locate/64_5837.html Here is my dmesg: OpenBSD 3.9 (GENERIC) #1: Mon Mar 27 20:58:47 CEST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 cpu0: Enhanced SpeedStep 1600 MHz (1484 mV): speeds: 1600, 1400, 1200, 1000, 800, 600 MHz real mem = 1073127424 (1047976K) avail mem = 972492800 (949700K) using 4278 buffers containing 53760000 bytes (52500K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(c3) BIOS, date 06/23/05, BIOS32 rev. 0 @ 0xf0000 apm0 at bios0: Power Management spec V1.2 (BIOS managing devices) apm0: AC on, battery charge unknown apm0: flags 130102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries) pcibios0: bad IRQ table checksum pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6360/160 (8 entries) pcibios0: PCI Exclusive IRQs: 5 10 11 pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x24cc pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10 usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 pci2 at ppb1 bus 2 ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11 ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address 00:0f:20:94:99:e5 cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 "O2 Micro OZ711Mx CardBus" rev 0x00 at pci2 dev 6 function 2 not configured cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M_ALT" rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:0d:9d:8c:12:85 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 cardslot2 at cbb2 slot 2 flags 0 cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20 pcmcia2 at cardslot2 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FB-60> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-A, A.2F> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask e74d netmask ef4d ttymask ffcf pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support ugen0 at uhub2 port 1 ugen0: ACTIONTEC Bluetooth by hp, rev 1.10/8.02, addr 2 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302
