> On Fri, 31 Mar 2006 17:34:09 -0000, Miod Vallat writes:
> >> Can't open network device `le(0,0,0)'
>
> >You really need your PROM to be permanently set to forth mode for this
> >to work. Make sure sunmon-compat? is set to false in the PROM
> >environment.
>
> ok printenv
> Parameter Name Value Default Value
> ...
> sunmon-compat? false true
> ...
> ok reset
>
> Still no luck:
>
> ...
> System Enable Reg Test
> Memory Test
>
> Type 'go' to resume
> Type help for more information
> ok boot net bsd.rd
> Probing Memory Bank #: 1 2 3 4 5
> Booting from: le(0,0,0)bsd.rd
> 11000 >> OpenBSD BOOT 2.2
> boot: client IP address: 192.168.1.167
> boot: client name: gonzales
> root addr=192.168.1.1 path=/data/cdimages/OpenBSD/root
> Can't open network device `le(0,0,0)'
> open: bsd.rd: Unknown error: code 13
> device[le(0,0,0)]:
>
> Any hints appreciated (my SS1+ didn't make such a fuss when I installed
> 3.2 ages and ages ago).
>
Hi
Check your aliases net is one of those eventually type in boot and the device
also you can give a try to a transceiver to convert AUI to UTP ...i had to do
this once...
~~~~~~
http://www.chatou-informatic.com
Maintenance, infogerance, interventions sur site, telemaintenance
