I have put the dmesg from the i386 openbsd that does work on this laptop.
OpenBSD 7.7 (RAMDISK_CD) #573: Sun Apr 13 11:08:58 MDT 2025
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
real mem = 3209216000 (3060MB)
avail mem = 3140419584 (2994MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: date 11/10/08, SMBIOS rev. 2.4 @ 0xe27a0 (37 entries)
bios0: vendor Acer version "V1.45" date 11/10/2008
bios0: Acer Aspire 7720
acpi0 at bios0: ACPI 4.0
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz ("GenuineIntel"
686-class) 1.67 GHz, 06-0f-0d, patch 000000a3
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus -1 (PXS1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP3)
acpiprt5 at acpi0: bus 6 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiprt8 at acpi0: bus -1 (PEGP)
acpiec0 at acpi0
"PNP0A08" at acpi0 not configured
"pnp0c14" at acpi0 not configured
acpicmos0 at acpi0
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"ENE0100" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1a00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 82801H HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int 16
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 4 int 17
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 4 int 18
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): msi, address 00:1b:38:77:42:72
brgphy0 at bge0 phy 1: BCM5787, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 4 int 19
pci4 at ppb3 bus 6
wpi0 at pci4 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW1, address 00:1c:bf:00:47:46
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 7
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 0 function 0 not configured
sdhc0 at pci5 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 4 int 22
sdhc0: SDHC 1.00, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 0 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 0 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 0 function 4 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WP03> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi,
AHCI 1.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 860, RVT0>
naa.5002538ec0a011bd
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
"Intel 82801H SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston
DataTraveler 3.0" rev 2.10/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP>
removable serial.09511666E68129AE01B1
sd1: 29592MB, 512 bytes/sector, 60604416 sectors
"SuYin Acer CrystalEye webcam" rev 2.00/1.00 addr 3 at uhub1 port 4 not
configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
syncing disks... done
rebooting...
OpenBSD 7.7 (RAMDISK_CD) #573: Sun Apr 13 11:08:58 MDT 2025
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
real mem = 3209216000 (3060MB)
avail mem = 3140419584 (2994MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: date 11/10/08, SMBIOS rev. 2.4 @ 0xe27a0 (37 entries)
bios0: vendor Acer version "V1.45" date 11/10/2008
bios0: Acer Aspire 7720
acpi0 at bios0: ACPI 4.0
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz ("GenuineIntel"
686-class) 1.67 GHz, 06-0f-0d, patch 000000a3
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus -1 (PXS1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP3)
acpiprt5 at acpi0: bus 6 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiprt8 at acpi0: bus -1 (PEGP)
acpiec0 at acpi0
"PNP0A08" at acpi0 not configured
"pnp0c14" at acpi0 not configured
acpicmos0 at acpi0
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"ENE0100" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1a00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
"Intel 82801H HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int 16
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 4 int 17
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 4 int 18
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): msi, address 00:1b:38:77:42:72
brgphy0 at bge0 phy 1: BCM5787, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 4 int 19
pci4 at ppb3 bus 6
wpi0 at pci4 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW1, address 00:1c:bf:00:47:46
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 7
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 0 function 0 not configured
sdhc0 at pci5 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 4 int 22
sdhc0: SDHC 1.00, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 0 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 0 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 0 function 4 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WP03> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi,
AHCI 1.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 860, RVT0>
naa.5002538ec0a011bd
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
"Intel 82801H SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston
DataTraveler 3.0" rev 2.10/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP>
removable serial.09511666E68129AE01B1
sd1: 29592MB, 512 bytes/sector, 60604416 sectors
"SuYin Acer CrystalEye webcam" rev 2.00/1.00 addr 3 at uhub1 port 4 not
configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
syncing disks... done
rebooting...
OpenBSD 7.7 (GENERIC.MP) #596: Sun Apr 13 10:57:57 MDT 2025
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
real mem = 3209170944 (3060MB)
avail mem = 3132964864 (2987MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/10/08, SMBIOS rev. 2.4 @ 0xe27a0 (37 entries)
bios0: vendor Acer version "V1.45" date 11/10/2008
bios0: Acer Aspire 7720
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET SSDT SSDT SSDT
acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) UHC5(S3)
EHC1(S3) EHC2(S3) PXS1(S4) EXP3(S4) EXP5(S4) EXP6(S4) AZAL(S4) MODM(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz ("GenuineIntel"
686-class) 1.67 GHz, 06-0f-0d, patch 000000a4
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz ("GenuineIntel"
686-class) 1.67 GHz, 06-0f-0d, patch 000000a4
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P32_)
acpiprt2 at acpi0: bus -1 (PXS1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP3)
acpiprt5 at acpi0: bus 6 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiprt8 at acpi0: bus -1 (PEGP)
acpiec0 at acpi0
acpi0: GPE 0x1c already enabled
"PNP0A08" at acpi0 not configured
"pnp0c14" at acpi0 not configured
acpicmos0 at acpi0
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "GC86508SAT0 " type Lion oem "SANYO "
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
"ENE0100" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0
acpitz0: critical temperature is 110 degC
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: OVGA
acpivout0 at acpivideo1: DD03
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1a00
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0: apic 4 int 16, I965GM, gen 4
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Realtek ALC268, Conexant/0x2c06, using Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int 16
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 4 int 17
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 4 int 18
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): msi, address 00:1b:38:77:42:72
brgphy0 at bge0 phy 1: BCM5787, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 4 int 19
pci4 at ppb3 bus 6
wpi0 at pci4 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW1, address 00:1c:bf:00:47:46
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 7
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 0 function 0 not configured
sdhc0 at pci5 dev 0 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 4 int 22
sdhc0: SDHC 1.00, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 0 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 0 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 0 function 4 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20N, WP03> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi,
AHCI 1.1
ahci0: PHY offline on port 0
ahci0: port 1: 3.0Gb/s
ahci0: PHY offline on port 2
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 1 lun 0: <ATA, Samsung SSD 860, RVT0>
naa.5002538ec0a011bd
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7325
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston
DataTraveler 3.0" rev 2.10/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP>
removable serial.09511666E68129AE01B1
sd1: 29592MB, 512 bytes/sector, 60604416 sectors
uvideo0 at uhub1 port 4 configuration 1 interface 0 "SuYin Acer
CrystalEye webcam" rev 2.00/1.00 addr 3
video0 at uvideo0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (06f7b5551657a11c.a) swap on sd0b dump on sd0b
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
On 6/28/25 11:51a, Jason wrote:
I have this laptop its an Acer aspire 7720 with an intel core 2 duo
t5450. Trying to boot the amd64 installer gives me an error of
maclloc: allocation large error
system has halted
I tried the i386 installer and it boots up fine. I can boot 64bit
linux just fine. I tried the snapshot version and it gives me the same
issue. Even an older version of openbsd gives me the same issue.
If image attachments work I have attached an image.
