Hi,
I've built "xz" from ports and it doesn't work:
hppa$ echo bla | xz > /tmp/bla.xz
hppa$ echo bla | xz -9 > /tmp/bla.xz
xz: (stdin): Cannot allocate memory
hppa$ uname -a
OpenBSD hppa.groessler.org 7.6 GENERIC#1132 hppa
hppa$ echo bla | xz -9 > /tmp/bla.xz
[xz]12853/208633 sp=75820030 inside 78022000-78421fff: not MAP_STACK
Segmentation fault (core dumped)
hppa$
regards,
chris
[ using 824556 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 7.6 (GENERIC) #1132: Mon Sep 30 09:06:51 MDT 2024
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/C3700 PA-RISC 2.0a
real mem = 3221225472 (3072MB)
rsvd mem = 524288 (512KB)
avail mem = 3145949184 (3000MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa0000 irq 31: PCXW2 L1-A 875MHz, FPU PCXW2 rev 1
cpu0: 768K(64b/l) Icache, 1536K(64b/l) wr-back Dcache, 240 coherent TLB
mem0 at mainbus0 offset ed10200: size 3072MB
astro0 at mainbus0 offset ed00000: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR4.0 APIC ver 20, 7 pins
pci0 at elroy0
sti0 at pci0 dev 2 function 0 "Hewlett-Packard Visualize FX4" rev 0x02
sti0: rev 8.13;9, ID 0x35ACDA3009A02587
sti0: A1262A, 1280x1024 frame buffer, 1280x1024x32 display
sti0: 10x20 font type 1, 40 bpc, charset 0-255
elroy1 at astro0 offset ed38000: Elroy TR4.0 APIC ver 20, 7 pins
pci1 at elroy1
sti1 at pci1 dev 1 function 0 "Hewlett-Packard Visualize FX4" rev 0x02
sti1: rev 8.13;9, ID 0x35ACDA3009A02587
sti1: A1262A, 1280x1024 frame buffer, 1280x1024x32 display
sti1: 10x20 font type 1, 40 bpc, charset 0-255
elroy2 at astro0 offset ed32000: Elroy TR4.0 APIC ver 20, 7 pins
pci2 at elroy2
ohci0 at pci2 dev 6 function 0 "NEC USB" rev 0x41: line 0 irq 2, version 1.0
ohci1 at pci2 dev 6 function 1 "NEC USB" rev 0x41: line 3 irq 3, version 1.0
ehci0 at pci2 dev 6 function 2 "NEC USB" rev 0x02: line 4 irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1
elroy3 at astro0 offset ed30000: Elroy TR4.0 APIC ver 20, 7 pins
pci3 at elroy3
dc0 at pci3 dev 12 function 0 "DEC 21142/3" rev 0x41: line 2 irq 6,
address 00:30:6e:48:3d:a7
lxtphy0 at dc0 phy 1: LXT970, rev. 3
"Analog Devices AD1889 Audio" rev 0x00 at pci3 dev 13 function 0 not
configured
pciide0 at pci3 dev 14 function 0 "NS PC87415 IDE" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using line 0 irq 7 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8162B, 0018> removable
cd0(pciide0:0:0): using BIOS timings, DMA mode 2
ssio0 at pci3 dev 14 function 1 "NS 87560 Legacy I/O" rev 0x01: line 0 irq 7
com0 at ssio0 offset 3f8 irq 4: ns16550a, 16 byte fifo
com1 at ssio0 offset 2f8 irq 3: ns16550a, 16 byte fifo
lpt0 at ssio0 offset 378 irq 7
ohci2 at pci3 dev 14 function 2 "NS USB" rev 0x02: line 0 irq 7, version
1.0, legacy support
ohci2: SMM does not respond, will reset
siop0 at pci3 dev 15 function 0 "Symbios Logic 53c896" rev 0x07: line 1
irq 8, using 8K of on-board RAM
scsibus2 at siop0: 16 targets, initiator 7
siop0: switching to single-ended mode
siop1 at pci3 dev 15 function 1 "Symbios Logic 53c896" rev 0x07: line 1
irq 8, using 8K of on-board RAM
scsibus3 at siop1: 16 targets, initiator 7
sd0 at scsibus3 targ 5 lun 0: <HP 36.4G, MAN3367MC, HP05>
eui.00000e110057d264
sd0: 34732MB, 512 bytes/sector, 71132960 sectors
sd1 at scsibus3 targ 6 lun 0: <HP 73.4G, ST373405LC, HP04>
eui.0004cffffeba327d
sd1: 70007MB, 512 bytes/sector, 143374738 sectors
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "NS OHCI root hub" rev
1.00/1.00 addr 1
siop1: target 5 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
siop1: target 6 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
uhub1: device problem, disabling port 3
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Adomax USB/PS2
Scroll Mouse" rev 1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "vendor 0x046a
product 0x0023" rev 2.00/2.20 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev2 at uhub3 port 2 configuration 1 interface 1 "vendor 0x046a
product 0x0023" rev 2.00/2.20 addr 3
uhidev2: iclass 3/0, 2 report ids
ucc0 at uhidev2 reportid 1: 1024 usages, 20 keys, array
wskbd1 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
wsdisplay0 at sti0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, vt100 emulation)
wsdisplay1 at sti1 mux 1: console (std, vt100 emulation), using wskbd0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
bootpath: 10/0/15/1.5 class=1 flags=c0<autoboot,autosearch>
hpa=0xf4004000 spa=0x0 io=0x19000
root on sd0a swap on sd0b dump on sd0b
