Hi again, I've replaced the NVMe disk; however, the issue persists without any noticeable improvement or change in behavior. I would greatly appreciate any guidance or suggestions on how to troubleshoot or resolve this problem. Any help would be highly valued.
On Wed, Feb 19, 2025 at 6:43 PM Samuel Jayden <samueljaydan1...@gmail.com> wrote: > Dear OpenBSD Misc Team, > > I am encountering an issue while trying to install OpenBSD 7.6. The > installation process does not detect my NVMe disk. > > During boot, I ran machine diskinfo and confirmed that the system > recognizes the NVMe disk: > > boot> machine diskinfo > Disk BlkSiz IoAlign Size Flags Checksum > hd0 512 0 14GB 0x4 0x63b8911f Removable > hd1 512 4 931GB 0x0 0x0 > > > During the installation shell, I checked the dmesg output and observed > the following logs: > > # dmesg | grep nvme > nvme0 at pci11 dev 0 function 0 vendor "Silicon Motion", unknown product > 0x2263 rev 0x03: failed to allocate interrupt slot for PIC msix pin > -2146762752 > > The NVMe disk itself does not appear to have any hardware issues. I can > see it listed in the BIOS without any problems. > > I have attached the dmesg.txt file for further information. > > Could you please advise on any steps I should take to successfully install > OpenBSD 7.6 with this NVMe disk? > > Best regards, >
