On 08/02/2025 09:40, YASUOKA Masahiko wrote:
Hi,
On Sat, 8 Feb 2025 01:37:16 +0200
Kapetanakis Giannis<bil...@edu.physics.uoc.gr> wrote:
Hi,
I'm trying to setup a new router with pppoe connection.
Using the same settings from a linux pc or a microtik switch with
routerOS, I can get the pppoe connection up with an IP address from
the provider.
From OpenBSD I'm having problems in the ipcp stage. Authentication is
ok.
I have a continuous (very fast) loop of
Feb 8 01:02:37 /bsd: pppoe0: ipcp parse opt values: still need
hisaddr send conf-nak
debugging shows that I get a remote peer IP, but local client does not
like it.
Feb 8 01:02:37 /bsd: 10.106.108.100 [not agreed] send conf-nak
My config is
inet 0.0.0.0 255.255.255.255 NONE
pppoedev vport3 authproto chap authname 'username' authkey 'pass'
peerproto none
dest 0.0.0.1
inet6 eui64
I could repeat the problem with this config.
It seems /etc/netstart assumes the "dest" line is the next line of the
"inet" line. So if you move the "dest" line to the next of "inet",
the problem will be solved. Otherwise, the dest address does not seem
to be configured properly.
Yes that also worked.
Alternately removing dest and making
inet 0.0.0.0 255.255.255.255 0.0.0.1
as per**bket@ 's advice
This way I got an IPv4.
For IPv6 I also needed a dhcp6leased configuration (also bket@)
Thanks both,
G
Adding some extra debugging in if_spppsubr.c:2435 I see that:
desiredaddr [10.106.108.100]
hisaddr [0.0.0.0] <--- is this ok?
IPCP_HISADDR_DYN is NOT set <--- is this ok?
adding dest 10.106.108.100, does not change anything
If I manually set IPCP_HISADDR_DYN, then I'm getting a much slower
loop of the following, but no IP.
Feb 8 01:14:52 /bsd: pppoe0: ipcp input(starting): <conf-req id=0x5
len=10
03-06-0a-6a-6c-64-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00>
Feb 8 01:14:52 /bsd: pppoe0: BILIAS: desiredaddr [10.106.108.100]
Feb 8 01:14:52 /bsd: pppoe0: BILIAS: hisaddr [10.106.108.100]
Feb 8 01:14:52 /bsd: pppoe0: BILIAS: IPCP_HISADDR_DYN is set
Feb 8 01:14:52 /bsd: pppoe0: BILIAS: desiredaddr != 0
Feb 8 01:14:52 /bsd: pppoe0: ipcp parse opts: address
Feb 8 01:14:52 /bsd: pppoe0: ipcp parse opt values: address
10.106.108.100 [ack] send conf-ack
Feb 8 01:14:52 /bsd: pppoe0: ipcp output <conf-ack id=0x5 len=10
03-06-0a-6a-6c-64>
Feb 8 01:14:52 /bsd: pppoe0 (8864) state=3, session=0x26d output ->
ac:de:48:00:00:01, len=18
Feb 8 01:14:57 /bsd: pppoe0: lcp input(opened): <echo-req id=0x2
len=8
51-33-33-bd-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00>
Feb 8 01:14:57 /bsd: pppoe0: got lcp echo req, sending echo rep
Feb 8 01:14:57 /bsd: pppoe0: lcp output <echo-reply id=0x2 len=8
92-c3-0a-96>
Feb 8 01:14:57 /bsd: pppoe0 (8864) state=3, session=0x26d output ->
ac:de:48:00:00:01, len=16
Feb 8 01:15:02 /bsd: pppoe0: ipcp input(starting): <conf-req id=0x6
len=10
03-06-0a-6a-6c-64-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00>
Feb 8 01:15:02 /bsd: pppoe0: BILIAS: desiredaddr [10.106.108.100]
Feb 8 01:15:02 /bsd: pppoe0: BILIAS: hisaddr [10.106.108.100]
Feb 8 01:15:02 /bsd: pppoe0: BILIAS: IPCP_HISADDR_DYN is set
Feb 8 01:15:02 /bsd: pppoe0: BILIAS: desiredaddr != 0
Feb 8 01:15:02 /bsd: pppoe0: ipcp parse opts: address
Feb 8 01:15:02 /bsd: pppoe0: ipcp parse opt values: address
10.106.108.100 [ack] send conf-ack
Feb 8 01:15:02 /bsd: pppoe0: ipcp output <conf-ack id=0x6 len=10
03-06-0a-6a-6c-64>
Feb 8 01:15:02 /bsd: pppoe0 (8864) state=3, session=0x26d output ->
ac:de:48:00:00:01, len=18
Why IPCP_HISADDR_DYN is NOT set even if I add dest 0.0.0.1 which
suppose to do that?
Even with this, something else must also be missing either in my
config or in the code.
Thanks for any help on this,
G
ps. from linux I see this:
Feb 8 01:18:59 pppd[7756]: local IP address xx.xx.xx.xx
Feb 8 01:18:59 NetworkManager[7756]: local IP address xx.xx.xx.xx
Feb 8 01:18:59 NetworkManager[7756]: remote IP address 10.106.108.100
Feb 8 01:18:59 NetworkManager[7756]: primary DNS address
xx.xx.xx.xx
Feb 8 01:18:59 NetworkManager[7756]: secondary DNS address
xx.xx.xx.xx
Feb 8 01:18:59 pppd[7756]: nm-ppp-plugin: ip-up event
Feb 8 01:18:59 pppd[7756]: remote IP address 10.106.108.100
