Just got one today and installed it without any issue so far :)
I thought I'd share some info.
Console redirection worked without a problem (coreboot too).
Installation went fine on eMMC via a USB key.
I didn't test routing yet but direct iperf3 gave ~940Mbps on igc(4) and
~510Mbps on wg(4)
with basic pf enabled.
hw.machine=amd64
hw.model=Intel(R) Celeron(R) N5105 @ 2.00GHz
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:936706d0bb7f9fd4
hw.diskcount=1
hw.sensors.cpu0.temp0=29.00 degC
hw.sensors.cpu0.frequency0=2850000000.00 Hz
hw.sensors.cpu1.frequency0=2900000000.00 Hz
hw.sensors.cpu2.frequency0=2850000000.00 Hz
hw.sensors.cpu3.frequency0=2850000000.00 Hz
hw.cpuspeed=2001
hw.setperf=100
hw.vendor=Protectli
hw.product=V1410
hw.version=1.0
hw.serialno=123456789
hw.physmem=8415326208
hw.usermem=8415232000
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=auto
hw.smt=0
hw.ncpuonline=4
hw.power=1
hw.ucomnames=
OpenBSD 7.6 (GENERIC.MP) #0: Thu Jan 9 07:32:40 MST 2025
r...@syspatch-76-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8415326208 (8025MB)
avail mem = 8137003008 (7760MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x78333000 (24 entries)
bios0: vendor 3mdeb version "Dasharo (coreboot+UEFI) v0.9.3" date 09/06/2024
bios0: Protectli V1410
efi0 at bios0: UEFI 2.8
efi0: EDK II rev 0x10000
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG TPM2 LPIT APIC SPCR DMAR HPET
acpi0: wakeup devices XHCI(S3) GLAN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=47f8ebbf<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND>
cpu0: cpuid 6 eax=110077<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=2394a2c3<FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA>
ecx=18400124<UMIP,WAITPKG> edx=fc000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=5, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=101<LAHF,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr
10a=14020c6b<IBRS_ALL,SKIP_L1DFL,MDS_NO,IF_PSCHANGE,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,GDS_NO,RFDS_CLEAR>
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
12-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.96 MHz, 06-9c-00, patch 24000026
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) N5105 @ 2.00GHz, 2793.95 MHz, 06-9c-00, patch 24000026
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpihpet0 at acpi0: 19200000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus 3 (RP06)
acpiprt7 at acpi0: bus 4 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"INT34C8" at acpi0 not configured
acpicmos0 at acpi0
"INTC1026" at acpi0 not configured intelpmc0 at acpi0: PEPD state 0:
0x7f:1:2:0x00:0x0000000000000060 counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0 state 1: 0x7f:1:2:0x00:0x0000000000000060 counter:
0x00:32:0:0x03:0x00000000fe00193c frequency: 0 tpm0 at acpi0 TPM_ 2.0 (CRB)
addr 0xfed40000/0x5000, device 0x00000000 rev 0x0 acpicpu0 at acpi0: C3(200@253
mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1), PSS acpicpu1 at
acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21), C1(1000@1 mwait.1),
PSS acpicpu2 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127 mwait.1@0x21),
C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@253 mwait.1@0x33), C2(350@127
mwait.1@0x21), C1(1000@1 mwait.1), PSS "BOOT0000" at acpi0 not configured
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2001, 2000, 1800, 1600, 1400, 1200,
1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, JASPERLAKE, gen 11
xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, xHCI
1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not
configured
"Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured
sdhc0 at pci0 dev 26 function 0 "Intel Jasper Lake eMMC" rev 0x01: apic 2 int 16
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
igc0 at pci1 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
64:62:66:2f:12:7a
ppb1 at pci0 dev 28 function 1 "Intel Jasper Lake PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
igc1 at pci2 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
64:62:66:2f:12:7b
ppb2 at pci0 dev 28 function 5 "Intel Jasper Lake PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
igc2 at pci3 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
64:62:66:2f:12:7c
ppb3 at pci0 dev 28 function 6 "Intel Jasper Lake PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
igc3 at pci4 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, address
64:62:66:2f:12:7d
pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01
azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi
azalia0: no supported codecs
ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic 2
int 16
iic0 at ichiic0
"Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Samsung, BJTD4R, 0000> removable
sd0: 29820MB, 512 bytes/sector, 61071360 sectors
uhub1 at uhub0 port 5 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/0.50 addr 2
uhub2 at uhub0 port 10 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub"
rev 3.10/0.50 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (936706d0bb7f9fd4.a) swap on sd0b dump on sd0b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
