Hi Alexandre, On Fri, 10 Jan 2025, Alexandre Ratchov wrote:
> On Fri, Jan 10, 2025 at 11:42:11AM +0100, Dirk-Wilhelm Peters wrote: > > I have an old Behringer BCF 2000 generic MIDI controller which refuses to > > work on my DeskMini X300-based computer running OpenBSD 7.6. When I turn > > on the controller, it is (mal)discovered in the following way: > > > > umidi0 at uhub1 port 1 configuration 1 interface 1 "BEHRINGER BCF2000" rev > > 1.10/1.00 addr 2 > > umidi0: (genuine USB-MIDI) > > umidi0: disabled. > > ugen1 at uhub1 port 1 configuration 1 "BEHRINGER BCF2000" rev 1.10/1.00 > > addr 2 > > > > If I then turn it off or disconnect the USB cable, the system completely > > freezes and I have to force power off by keeping the power button > > pressed. I have tried all USB ports on the system with no better > > results. Also, a different cable did not change anything. > > > > I've one, but mine doesn't panic. Which mode are you using (press > Edit+Store keys and use the first encoder). It was set to USB mode 1. Switching to USB modes 2, 3, and 4 did not change anything. It still connects as "umidi0: disabled" and freezes the system when removed/turned off. > Could you try other USB ports and see if the same happens? It shows the same behavior on all USB ports.
