> So 3.20 works and 3.21 fails? Correct Mike.
> If so, I can take a look. Thanks. > Is this dmesg below from the machine on which 3.21 fails? Correct. The dmesg with the amd ryzen 9 7900 is the system which doesn't boot the 3.21 alpine. Passing the noxsave kernel in the vm resolves it though. >> >> dmesg below: >> >> >> >> cpu0: AMD Ryzen 9 7900 12-Core Processor, 3700.01 MHz, 19-61-02, patch >> >> 0a601209 >> >> cpu0: cpuid 1 >> >> edx=178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> >> >> >> ecx=76d8320b<SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND> >> >> cpu0: cpuid 6 eax=4<ARAT> ecx=1<EFFFREQ> >> >> cpu0: cpuid 7.0 >> >> ebx=f1bf97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL> >> >> ecx=405fce<AVX512VBMI,UMIP,PKU> edx=10000010<L1DF> >> >> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> >> >> cpu0: cpuid 80000001 edx=2fd3fbff<NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG> >> >> ecx=75c237ff<LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX> >> >> cpu0: cpuid 80000007 edx=6799<HWPSTATE,ITSC> >> >> cpu0: cpuid 80000008 >> >> ebx=791ef257<IBPB,IBRS,STIBP,STIBP_ALL,IBRS_PREF,IBRS_SM,SSBD> >> >> cpu0: cpuid 8000001F eax=1<SME> >> > >> > Are the working and non-working servers the same? >> >> No. Yeah, the above is the broken system (new amd ryzen 9) and below is >> the old system which worked without issue. >> >> OpenBSD 7.6 (GENERIC.MP) #338: Mon Sep 30 08:55:35 MDT 2024 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 34304724992 (32715MB) >> avail mem = 33241415680 (31701MB) >> random: good seed from bootblocks >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb1d0 (104 entries) >> bios0: vendor American Megatrends Inc. version "3703" date 07/16/2013 >> bios0: ASUSTeK COMPUTER INC. P8P67-M >> acpi0 at bios0: ACPI 4.0 >> acpi0: sleep states S0 S1 S3 S4 S5 >> acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT SSDT DMAR >> acpi0: wakeup devices UAR1(S4) P0P1(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) >> RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) >> RP08(S4) PXSX(S4) [...] >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.26 MHz, 06-2a-07, patch >> 0000002f >> cpu0: cpuid 1 >> edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> ecx=17bae3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX> >> cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ> >> cpu0: cpuid 7.0 edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> >> cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48 >> cpu0: cpuid d.1 eax=1<XSAVEOPT> >> cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF> >> cpu0: cpuid 80000007 edx=100<ITSC> >> cpu0: MELTDOWN >> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB >> 64b/line 8-way L2 cache, 8MB 64b/line 16-way L3 cache >> cpu0: smt 0, core 0, package 0 >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges >> cpu0: apic clock running at 100MHz >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE >> cpu1 at mainbus0: apid 2 (application processor) >> cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.28 MHz, 06-2a-07, patch >> 0000002f >> cpu1: smt 0, core 1, package 0 >> cpu2 at mainbus0: apid 4 (application processor) >> cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.34 MHz, 06-2a-07, patch >> 0000002f >> cpu2: smt 0, core 2, package 0 >> cpu3 at mainbus0: apid 6 (application processor) >> cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.41 MHz, 06-2a-07, patch >> 0000002f >> cpu3: smt 0, core 3, package 0 >> cpu4 at mainbus0: apid 1 (application processor) >> cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3412.03 MHz, 06-2a-07, patch >> 0000002f >> cpu4: smt 1, core 0, package 0 >> cpu5 at mainbus0: apid 3 (application processor) >> cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.95 MHz, 06-2a-07, patch >> 0000002f >> cpu5: smt 1, core 1, package 0 >> cpu6 at mainbus0: apid 5 (application processor) >> cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.71 MHz, 06-2a-07, patch >> 0000002f >> cpu6: smt 1, core 2, package 0 >> cpu7 at mainbus0: apid 7 (application processor) >> cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, 3411.53 MHz, 06-2a-07, patch >> 0000002f >> cpu7: smt 1, core 3, package 0 >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins >> acpimcfg0 at acpi0 >> acpimcfg0: addr 0xf8000000, bus 0-63 >> acpihpet0 at acpi0: 14318179 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (P0P1) >> acpiprt2 at acpi0: bus 2 (RP01) >> acpiprt3 at acpi0: bus -1 (RP02) >> acpiprt4 at acpi0: bus -1 (RP03) >> acpiprt5 at acpi0: bus 3 (RP04) >> acpiprt6 at acpi0: bus 6 (RP06) >> acpiprt7 at acpi0: bus 7 (RP07) >> acpiprt8 at acpi0: bus 8 (RP08) >> acpiprt9 at acpi0: bus 1 (PEG0) >> acpiprt10 at acpi0: bus -1 (PEG1) >> acpiprt11 at acpi0: bus -1 (PEG2) >> acpiprt12 at acpi0: bus -1 (PEG3) >> acpiprt13 at acpi0: bus 4 (RP05) >> acpiprt14 at acpi0: bus 5 (PXSX) >> acpiec0 at acpi0: not present >> acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 >> acpicmos0 at acpi0 >> com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo >> acpibtn0 at acpi0: PWRB(wakeup) >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C0B" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu4 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu5 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu6 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpicpu7 at acpi0: C3(350@104 mwait.1@0x20), C2(500@80 mwait.1@0x10), >> C1(1000@1 mwait.1), PSS >> acpipwrres0 at acpi0: FN00, resource for FAN0 >> acpipwrres1 at acpi0: FN01, resource for FAN1 >> acpipwrres2 at acpi0: FN02, resource for FAN2 >> acpipwrres3 at acpi0: FN03, resource for FAN3 >> acpipwrres4 at acpi0: FN04, resource for FAN4 >> acpitz0 at acpi0: critical temperature is 99 degC >> acpitz1 at acpi0: critical temperature is 99 degC >> acpivideo0 at acpi0: GFX0 >> acpivout0 at acpivideo0: DD02 >> cpu0: using VERW MDS workaround (except on vmm entry) >> cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3300, 3100, 3000, >> 2900, 2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 >> ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi >> pci1 at ppb0 bus 1 >> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x128b rev >> 0xa1 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0e0f rev >> 0xa1: msi >> azalia0: no supported codecs >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev >> 2.00/1.00 addr 1 >> azalia1 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi >> azalia1: codecs: Realtek ALC887 >> audio0 at azalia1 >> ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi >> pci2 at ppb1 bus 2 >> ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi >> pci3 at ppb2 bus 3 >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), >> msi, address 00:e0:4c:1e:c5:df >> rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 2 >> ppb3 at pci0 dev 28 function 4 "Intel 82801BA Hub-to-PCI" rev 0xb5: msi >> pci4 at ppb3 bus 4 >> ppb4 at pci4 dev 0 function 0 "ASMedia ASM1083/1085 PCIE-PCI" rev 0x01 >> pci5 at ppb4 bus 5 >> puc0 at pci5 dev 0 function 0 "NetMos Nm9865" rev 0x00: ports: 16 com >> com4 at puc0 port 0 apic 2 int 16: st16650, 32 byte fifo >> puc1 at pci5 dev 0 function 1 "NetMos Nm9865" rev 0x00: ports: 16 com >> com5 at puc1 port 0 apic 2 int 17: st16650, 32 byte fifo >> ppb5 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb5: msi >> pci6 at ppb5 bus 6 >> jmb0 at pci6 dev 0 function 0 "JMicron JMB361 IDE/SATA" rev 0x10 >> ahci0 at jmb0: apic 2 int 17, AHCI 1.1 >> scsibus1 at ahci0: 32 targets >> pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to >> native-PCI >> pciide0: using apic 2 int 17 for native-PCI interrupt >> pciide0: channel 0 disabled (no drives) >> pciide0: channel 1 disabled (no drives) >> ppb6 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5: msi >> pci7 at ppb6 bus 7 >> re1 at pci7 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E >> (0x2c00), msi, address f4:6d:04:d9:f4:2c >> rgephy1 at re1 phy 7: RTL8169S/8110S/8211, rev. 4 >> ppb7 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5: msi >> pci8 at ppb7 bus 8 >> xhci0 at pci8 dev 0 function 0 "ASMedia ASM1042 xHCI" rev 0x00: msix, xHCI >> 0.96 >> usb1 at xhci0: USB revision 3.0 >> uhub1 at usb1 configuration 1 interface 0 "ASMedia xHCI root hub" rev >> 3.00/1.00 addr 1 >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23 >> usb2 at ehci1: USB revision 2.0 >> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev >> 2.00/1.00 addr 1 >> pcib0 at pci0 dev 31 function 0 "Intel P67 LPC" rev 0x05 >> ahci1 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3 >> ahci1: port 0: 6.0Gb/s >> ahci1: port 1: 6.0Gb/s >> ahci1: port 3: 3.0Gb/s >> ahci1: port 4: 3.0Gb/s >> ahci1: port 5: 3.0Gb/s >> scsibus2 at ahci1: 32 targets >> sd0 at scsibus2 targ 0 lun 0: <ATA, CT500MX500SSD1, M3CR> >> naa.500a0751e210c4c9 >> sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin >> sd1 at scsibus2 targ 1 lun 0: <ATA, CT500MX500SSD1, M3CR> >> naa.500a0751e2029946 >> sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin >> sd2 at scsibus2 targ 3 lun 0: <ATA, ST2000DM006-2DM1, CC26> >> naa.5000c500b0037f38 >> sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors >> sd3 at scsibus2 targ 4 lun 0: <ATA, ST32000641AS, CC13> naa.5000c5003646094a >> sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors >> sd4 at scsibus2 targ 5 lun 0: <ATA, ST2000DM006-2DM1, CC26> >> naa.5000c500b1734f1c >> sd4: 1907729MB, 512 bytes/sector, 3907029168 sectors >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 >> int 18 >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 >> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 >> spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 >> spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800 >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >> pckbd0 at pckbc0 (kbd slot) >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> lpt0 at isa0 port 0x378/4 irq 7 >> wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 >> lm1 at wbsio0 port 0x290/8: NCT6776F >> vmm0 at mainbus0: VMX/EPT >> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" >> rev 2.00/0.00 addr 2 >> uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech Wireless >> Receiver" rev 1.10/3.08 addr 3 >> uhidev0: iclass 3/1, 5 report ids >> ums0 at uhidev0 reportid 1: 5 buttons, Z dir >> wsmouse0 at ums0 mux 0 >> uhid0 at uhidev0 reportid 5: input=0, output=0, feature=7 >> umass0 at uhub1 port 1 configuration 1 interface 0 "TOSHIBA EXTERNAL_USB" >> rev 3.00/0.00 addr 2 >> umass0: using SCSI over Bulk-Only >> scsibus3 at umass0: 2 targets, initiator 0 >> sd5 at scsibus3 targ 1 lun 0: <TOSHIBA, EXTERNAL_USB, 0> >> serial.0480090640523010721F >> sd5: 953869MB, 512 bytes/sector, 1953525168 sectors >> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" >> rev 2.00/0.00 addr 2 >> uhidev1 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Keyboard" >> rev 1.10/62.00 addr 3 >> uhidev1: iclass 3/1 >> ukbd0 at uhidev1: 8 variable keys, 6 key codes >> wskbd1 at ukbd0 mux 1 >> wskbd1: connecting to wsdisplay0 >> uhidev2 at uhub4 port 1 configuration 1 interface 1 "Logitech USB Keyboard" >> rev 1.10/62.00 addr 3 >> uhidev2: iclass 3/0 >> ucc0 at uhidev2: 1301 usages, 20 keys, array >> wskbd2 at ucc0 mux 1 >> wskbd2: connecting to wsdisplay0 >> vscsi0 at root >> scsibus4 at vscsi0: 256 targets >> softraid0 at root >> scsibus5 at softraid0: 256 targets >> sd6 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> >> sd6: 476939MB, 512 bytes/sector, 976772576 sectors >> softraid0: trying to bring up sd7 degraded >> sd7 at scsibus5 targ 2 lun 0: <OPENBSD, SR RAID 5, 006> >> sd7: 3815457MB, 512 bytes/sector, 7814057216 sectors >> softraid0: roaming device -> sd4a >> root on sd6a (441e10d3d3aeca9d.a) swap on sd6b dump on sd6b >>
