I’m using an Intel X550-T2 card, very expensive. The Realtek is unused.
Brodey Sent from my iPhone > On Nov 24, 2024, at 23:51, Aaron Mason <simplersolut...@gmail.com> wrote: > > Try a different NIC rather than what appears to be an onboard Realtek > NIC. Realteks are pretty craptacular - it's my understanding that they > basically offload everything to the OS which means it raises an > interrupt whenever a butterfly sneezes, hence the high CPU usage under > load. > >> On Mon, Nov 25, 2024 at 7:54 AM Brodey Dover <dover...@gmail.com> wrote: >> >> It's a fairly hefty system for a router. >> >> After updates speeds are up to 750down/1200up. When testing the download >> speed, all cores are stuck ~33%. When testing the upload speed, one core >> rockets to 100% and the others are around 20%. >> >> Thank you, >> Brodey >> >>> On Sun, 24 Nov 2024 at 15:25, Stuart Henderson <stu.li...@spacehopper.org> >>> wrote: >>> >>> On 2024-11-24, Brodey Dover <dover...@gmail.com> wrote: >>>> --000000000000b205f70627ac962e >>>> Content-Type: text/plain; charset="UTF-8" >>>> >>>> Hello all! >>>> >>>> I have an OpenBSD 7.2 router that I have PPPoE passthrough configured to my >>>> ISP's Fibre modem on its 10G switch. I have a Moker 2.5G switch that is >>>> connected to that and my router has an Intel X550-T2 NIC. Everything >>>> negotiates just fine. I was using ADMZ previously but there is a technical >>>> issue (I think with routes)...so I'm back to trying out PPPoE passthrough. >>>> >>>> I'm currently getting 400-600Mbps down and about 200Mbps higher on the >>>> upload. This is on a symmetrical 3Gbps connection. >>>> >>>> Should I upgrade the router and hope for the best? >>> >>> dmesg might give some idea about what sort of speed would be reasonable >>> to expect from the hardware. >>> >>> > > > -- > Aaron Mason - Programmer, open source addict > I've taken my software vows - for beta or for worse >
