On 1 Oct 2024, at 15:00, Pierre Dupond <76nem...@gmx.ch> wrote: > > On Tue, 1 Oct 2024 07:46:42 -0000 (UTC) > Stuart Henderson <stu.li...@spacehopper.org> wrote: > >> >>> sd0: 14804MB, 512 bytes/sector, 30318592 sectors >>> softraid0 at root >>> scsibus1 at softraid0: 256 targets >>> root on rd0a swap on rd0b dump on rd0b >>> WARNING: bad clock chip time >>> WARNING: CHECK AND RESET THE DATE! >>> 3ÞÿÚKXø\]òÿáøáøáøáøáøáøáøáøáøáøáøáøáøáøáøá >> >> At this point output moves from the kernel to userland. That looks like >> the port has changed speed. I would first try 1500000 as it's fairly >> common on the embedded ARM boards. > > Finally I have choosen an other path. I have installed the UEFI > found here: > https://github.com/edk2-porting/edk2-rk3588?tab=readme-ov-file > > > I was successful to boot OpenBSD but, when the system should be installed, > the EMMC disk added to the radxa was not found. The disk used > to install OpenBSD (install75.img) was modified by adding on the boot > partition > the specific DTB files for the radxa rockpi 5b. > > > The dmesg file which follows this text shows a lot of undefined devices, this > could perhaps be the reason of not discovering the other disks (nor the SD > card > with the UEFI or the EMMC disk). Only USB stick are recognised. The UEFI > recognised > more disk. > > Any idea to progress further? > > Thanks a lot > > P.S. "axe" was a network card in the USB switch used to connect keyboard and > mouse. > The native card of the radxa (rge) was recognised and can be used. > -----------------------------------------------------------------dmesg----------------- > OpenBSD 7.5 (RAMDISK) #124: Wed Mar 20 20:05:58 MDT 2024 > dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK > real mem = 16862748672 (16081MB) > avail mem = 16206413824 (15455MB) > random: good seed from bootblocks > mainbus0 at root: ACPI > psci0 at mainbus0: PSCI 1.1, SMCCC 1.5, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.7 > efi0: EDK II rev 0x10000 > smbios0 at efi0: SMBIOS 3.3.0 > smbios0: vendor EDK II version "v0.11.2" date 07/11/2024 > smbios0: Radxa ROCK 5 Model B > cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 > cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 128KB 64b/line 4-way L2 cache > cpu0: 4096KB 64b/line 16-way L3 cache > cpu0: > DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS > agintc0 at mainbus0 shift 4:4 nirq 512 nredist 8: "interrupt-controller" > agtimer0 at mainbus0: 24000 kHz > acpi0 at mainbus0: ACPI 6.3 > acpi0: tables DSDT FACP DBG2 GTDT APIC MCFG PPTT SPCR BGRT > acpimcfg0 at acpi0 > acpimcfg0: addr 0x900008000, bus 1-1 > acpimcfg0: addr 0x940008000, bus 1-1 > acpimcfg0: addr 0x980008000, bus 1-1 > acpimcfg0: addr 0x9c0008000, bus 1-1 > acpimcfg0: addr 0xa00008000, bus 1-1 > "ACPI0010" at acpi0 not configured > "ACPI0010" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0010" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0010" at acpi0 not configured > "ACPI0007" at acpi0 not configured > "ACPI0007" at acpi0 not configured > acpipci0 at acpi0 PCI0 > pci0 at acpipci0 > acpipci1 at acpi0 PCI2 > pci1 at acpipci1 > acpipci2 at acpi0 PCI4 > pci2 at acpipci2 > rge0 at pci2 dev 0 function 0 "Realtek RTL8125" rev 0x05: irq 282, address > 00:e0:4c:03:42:08 > "RKCP0D40" at acpi0 not configured > "RKCPFE2C" at acpi0 not configured > "ARMH0330" at acpi0 not configured > "ARMH0330" at acpi0 not configured > "ARMH0330" at acpi0 not configured > "RKCP3002" at acpi0 not configured > "RKCP3002" at acpi0 not configured > "RKCP3002" at acpi0 not configured > "RKCP3002" at acpi0 not configured > "RKCP3002" at acpi0 not configured > "PRP0001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "RKCP3001" at acpi0 not configured > "ESSX8316" at acpi0 not configured > "RKCP3001" at acpi0 not configured > com0 at acpi0 UAR2 addr 0xfeb50000/0x1000 irq 365: ns16550, no working fifo > com0: console > "RKCP3003" at acpi0 not configured > ehci0 at acpi0 EHC0 addr 0xfc800000/0x40000 irq 247 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ehci1 at acpi0 EHC1 addr 0xfc880000/0x40000 irq 250 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at acpi0 OHC0 addr 0xfc840000/0x40000 irq 248: version 1.0 > ohci1 at acpi0 OHC1 addr 0xfc8c0000/0x40000 irq 251: version 1.0 > xhci0 at acpi0 XHC0 addr 0xfc000000/0x400000 irq 252, xHCI 1.10 > usb2 at xhci0: USB revision 3.0 > uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > xhci1 at acpi0 XHC1 addr 0xfc400000/0x400000 irq 253, xHCI 1.10 > usb3 at xhci1: USB revision 3.0 > uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > xhci2 at acpi0 XHC2 addr 0xfcd00000/0x400000 irq 254, xHCI 1.10 > usb4 at xhci2: USB revision 3.0 > uhub4 at usb4 configuration 1 interface 0 "Generic xHCI root hub" rev > 3.00/1.00 addr 1 > usb5 at ohci0: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at ohci1: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > uhub7 at uhub0 port 1 configuration 1 interface 0 "Terminus Technology USB > 2.0 Hub" rev 2.00/1.11 addr 2 > umass0 at uhub1 port 1 configuration 1 interface 0 " USB DISK 2.0" rev > 2.00/1.10 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <, USB DISK 2.0, PMAP> removable > serial.13fe3100078A113C30AF > sd0: 3820MB, 512 bytes/sector, 7823360 sectors > uhub8 at uhub3 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" > rev 2.10/91.00 addr 2 > uhidev0 at uhub8 port 2 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.90 addr 3 > uhidev0: iclass 3/1, 1 report id > uhid at uhidev0 reportid 1 not configured > uhub9 at uhub8 port 3 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" > rev 2.00/96.15 addr 4 > uhidev1 at uhub9 port 2 configuration 1 interface 0 "Apple Inc. Apple > Keyboard" rev 2.00/0.74 addr 5 > uhidev1: iclass 3/1 > ukbd0 at uhidev1 > wskbd0 at ukbd0: console keyboard > uhidev2 at uhub9 port 2 configuration 1 interface 1 "Apple Inc. Apple > Keyboard" rev 2.00/0.74 addr 5 > uhidev2: iclass 3/0 > uhid at uhidev2 not configured > axe0 at uhub8 port 4 configuration 1 interface 0 "ASIX Electronics AX88772A" > rev 2.00/0.01 addr 6 > axe0: AX88772, address 00:00:00:00:01:f7 > ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI > 0x000ec6, model 0x0006 > uhub10 at uhub3 port 2 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 > Hub" rev 3.00/91.01 addr 7 > softraid0 at root > scsibus1 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > WARNING: bad clock chip time > WARNING: CHECK AND RESET THE DATE! > simplefb0 at mainbus0: 1920x1080, 32bpp > wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation), using wskbd0 >
There is a thread on arm@ that talks about installing OpenBSD NanoPi R6S https://marc.info/?t=172269110600001&r=1&w=2
