Stuart Henderson wrote:
> On 2006/03/24 09:24, Ed Vazquez wrote:
>> unknown vendor 0x14bc product 0xd002 (class network subclass
>> miscellaneous, rev 0x01) at pci0 dev 12 function 0 not configured
>
> That sounds like a PCI ADSL card (14bc=Globespan).
>
>> Help? Can I provide better data (let me know how)?
>
> _Complete_ dmesg.
>
OK, here's the full dmesg from 3.9-current (which is what I
installed this morning...), I should have included it earlier, so my
apologies for the oversight.
Yes, there's a ADSL card in there that I haven't configured yet, so
maybe I'm mistaking it for the SysKonnect (which isn't appearing in
dmesg or ifconfig -a at all now that I look at it with the above
information). When I plug a network cable into the SysKonnect, I
get the standard line/activity lights, so I know it's getting
voltage from the PCI bus and the switch reports the line as
"active". The Winbox testing seems to indicate that the card is
functional as well.
There is an Adaptec card in place, but I'm having the commonly
reported "tx underrun" issue which is why I'm trying to replace it
with the SysKonnect.
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
sf0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:d1:ee:cc:45
groups: egress
media: Ethernet autoselect (none)
status: active
inet6 fe80::200:d1ff:feee:cc45%sf0 prefixlen 64 scopeid 0x1
inet 192.168.0.36 netmask 0xffffffc0 broadcast 192.168.0.63
sf1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:d1:ee:cc:46
media: Ethernet autoselect (none)
status: no carrier
sf2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:d1:ee:cc:47
media: Ethernet autoselect (none)
status: no carrier
sf3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:d1:ee:cc:48
media: Ethernet autoselect (100baseTX)
status: active
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
enc0: flags=0<> mtu 1536
# cat /var/run/dmesg.boot
OpenBSD 3.9-current (GENERIC) #0: Fri Mar 17 11:21:52 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache)
351 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 536387584 (523816K)
avail mem = 482525184 (471216K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(57) BIOS, date 10/11/00, BIOS32 rev. 0 @
0xfb230
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb6a4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdcd0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu1 at mainbus0: (uniprocessor)
cpu1: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache)
351 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GZ" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91361U3>
wd0: 16-sector PIO, LBA, 12982MB, 26588016 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CREATIVE, CD5233E, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev
0x01pci_intr_map: no mapping for pin D
: couldn't map interrupt
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
iic0: addr 0x2d 00=02 01=4d 02=4f 03=d4 04=6a 05=96 06=18 07=02
08=ab 09=8f 0a=05 0b=61 0c=56 0d=bd 0e=25 0f=54 10=21 11=55 12=87
13=8c 14=46 15=17 16=25 17=e8 18=3d 19=2d 1a=21 1b=22 1c=04 1d=b2
1e=00 1f=00 20=7d 21=00 22=d8 23=bf 24=bf 25=ba 26=c0 27=18 2b=f1
2c=83 2e=00 2f=06 30=3e 31=04 32=27 33=04 34=17 35=20 36=01 37=10
38=12 39=32 3a=29 3b=f0 3c=4c 3d=42 3e=05 3f=10 40=05 41=cf 42=1f
45=ef 46=7f 47=f0 48=2d 49=40 4a=00 4b=40 4c=40 4d=40 4e=05 4f=00
50=05 51=00 52=00 55=ef 56=7f 57=f0 58=2d 59=40 5a=40 5b=40 5c=40
5d=40 5e=40 5f=00 60=7d 61=00 62=d8 63=bf 64=bf 65=ba 66=c0 67=18
6b=f1 6c=83 6e=00 6f=06 70=3e 71=04 72=27 73=04 74=17 75=20 76=01
77=10 78=12 79=32 7a=29 7b=f0 7c=4c 7d=42 7e=05 7f=10 80=02 81=4d
82=4f 83=d4 84=6a 85=96 86=18 87=02 88=ab 89=8f 8a=05 8b=61 8c=56
8d=bd 8e=25 8f=54 90=21 91=55 92=87 93=8c 94=46 95=17 96=25 97=e8
98=3d 99=2d 9a=21 9b=22 9c=04 9d=b2 9e=00 9f=00 a0=7d a1=00 a2=d8
a3=bf a4=bf a5=ba a6=c0 a7=18 ab=f1 ac=83 ae=00 af=06 b0=3e b1=04
b2=27 b3=04 b4=17 b5=20 b6=01 b7=10 b8=12 b9=32 ba=29 bb=f0 bc=4c
bd=42 be=05 bf=10 c0=05 c1=00 c2=00 c5=ef c6=7f c7=f0 c8=2d c9=40
ca=40 cb=40 cc=40 cd=40 ce=40 cf=00 d0=05 d1=00 d2=00 d5=ef d6=7f
d7=f0 d8=2d d9=40 da=40 db=40 dc=40 dd=40 de=40 df=00 e0=7d e1=00
e2=d8 e3=bf e4=bf e5=ba e6=c0 e7=18 eb=f1 ec=83 ee=00 ef=06 f0=3e
f1=04 f2=27 f3=04 f4=17 f5=20 f6=01 f7=10 f8=12 f9=32 fa=29 fb=f0
fc=4c fd=42 fe=05 ff=10
ppb1 at pci0 dev 9 function 0 "DEC 21154 PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
sf0 at pci2 dev 4 function 0 "Adaptec AIC-6915" rev 0x03: irq 10,
address 00:00:d1:ee:cc:45
sqphy0 at sf0 phy 1: Seeq 80220 10/100 PHY, rev. 1
sf1 at pci2 dev 5 function 0 "Adaptec AIC-6915" rev 0x03: irq 11,
address 00:00:d1:ee:cc:46
sqphy1 at sf1 phy 1: Seeq 80220 10/100 PHY, rev. 1
sf2 at pci2 dev 6 function 0 "Adaptec AIC-6915" rev 0x03: irq 5,
address 00:00:d1:ee:cc:47
sqphy2 at sf2 phy 1: Seeq 80220 10/100 PHY, rev. 1
sf3 at pci2 dev 7 function 0 "Adaptec AIC-6915" rev 0x03: irq 3,
address 00:00:d1:ee:cc:48
sqphy3 at sf3 phy 1: Seeq 80220 10/100 PHY, rev. 1
unknown vendor 0x14bc product 0xd002 (class network subclass
miscellaneous, rev 0x01) at pci0 dev 12 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: LM78J
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e345 netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Thanks again!
--
Ed V.
The world's coming to an end. Log off and leave in an orderly fashion.
