Hello list, Today I updated to the latest snapshot and updated all packages. When the system rebooted, the fans started spinning full speed and the system was totally locked. The num-lock light would not toggle.
After a hard reset, I disabled xenodm from single-user mode and rebooted. The system boots normally. The last entry in `/var/log/messages` is "reorder_kernel: kernel relinking done". `/var/log/Xorg.0.log` and `/var/log/Xorg.0.log.old` are both empty. "/var/log/daemon" shows entries from ntpd before the freeze. "/var/log/xenodm.log" is empty and was last updated a few reboots back. Failing a simple fix, what's the best way back to a workable system? Do a 7.5 install? Thank you, Ron dmesg below ============================================================= OpenBSD 7.6-beta (GENERIC.MP <http://generic.mp/>) #260: Sat Aug 17 22:18:53 MDT 2024 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP <http://generic.mp/> real mem = 17032646656 (16243MB) avail mem = 16493068288 (15729MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xc9764000 (56 entries) bios0: vendor HP version "P21 Ver. 02.46" date 03/28/2023 bios0: HP HP EliteDesk 800 G3 DM 35W efi0 at bios0: UEFI 2.5 efi0: HP rev 0x2002e acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT UEFI SSDT TPM2 SSDT MSDM SLIC WSMT HPET APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT ASF! FPDT BGRT acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 23999999 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu0: cpuid 1 edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ> cpu0: cpuid 7.0 ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=121<LAHF,ABM,3DNOWP> cpu0: cpuid 80000007 edx=100<ITSC> cpu0: msr 10a=c04<RSBA,MISC_PKG_CT,ENERGY_FILT> cpu0: MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 4-way L2 cache, 8MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu3: smt 0, core 3, package 0 cpu4 at mainbus0: apid 1 (application processor) cpu4: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu4: smt 1, core 0, package 0 cpu5 at mainbus0: apid 3 (application processor) cpu5: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu5: smt 1, core 1, package 0 cpu6 at mainbus0: apid 5 (application processor) cpu6: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu6: smt 1, core 2, package 0 cpu7 at mainbus0: apid 7 (application processor) cpu7: Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz, 2693.73 MHz, 06-5e-03, patch 000000f0 cpu7: smt 1, core 3, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus -1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus -1 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiprt7 at acpi0: bus -1 (RP07) acpiprt8 at acpi0: bus -1 (RP08) acpiprt9 at acpi0: bus -1 (RP09) acpiprt10 at acpi0: bus -1 (RP10) acpiprt11 at acpi0: bus -1 (RP11) acpiprt12 at acpi0: bus -1 (RP12) acpiprt13 at acpi0: bus -1 (RP13) acpiprt14 at acpi0: bus -1 (RP14) acpiprt15 at acpi0: bus -1 (RP15) acpiprt16 at acpi0: bus -1 (RP16) acpiprt17 at acpi0: bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1 (RP19) acpiprt20 at acpi0: bus -1 (RP20) acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23 at acpi0: bus -1 (RP23) acpiprt24 at acpi0: bus -1 (RP24) acpiec0 at acpi0: not present acpiec1 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 "PNP0A06" at acpi0 not configured acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB "PNP0C14" at acpi0 not configured tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x001b15d1 rev 0x10 acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu4 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu5 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu6 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu7 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: WRST acpipwrres1 at acpi0: WRST acpipwrres2 at acpi0: WRST acpipwrres3 at acpi0: WRST acpipwrres4 at acpi0: WRST acpipwrres5 at acpi0: WRST acpipwrres6 at acpi0: WRST acpipwrres7 at acpi0: WRST acpipwrres8 at acpi0: WRST acpipwrres9 at acpi0: WRST acpipwrres10 at acpi0: WRST acpipwrres11 at acpi0: WRST acpipwrres12 at acpi0: WRST acpipwrres13 at acpi0: WRST acpipwrres14 at acpi0: WRST acpipwrres15 at acpi0: WRST acpipwrres16 at acpi0: WRST acpipwrres17 at acpi0: WRST acpipwrres18 at acpi0: WRST acpipwrres19 at acpi0: WRST acpipwrres20 at acpi0: WRST acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD2F cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 2693 MHz: speeds: 2801, 2800, 2700, 2500, 2400, 2200, 2000, 1900, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06 drm0 at inteldrm0 inteldrm0: msi, SKYLAKE, gen 9 xhci0 at pci0 dev 20 function 0 "Intel 200 Series xHCI" rev 0x00: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 200 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured "Intel 200 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured puc0 at pci0 dev 22 function 3 "Intel 200 Series KT" rev 0x00: ports: 16 com com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo ahci0 at pci0 dev 23 function 0 "Intel 200 Series AHCI" rev 0x00: msi, AHCI 1.3.1 ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 1 lun 0: <ATA, KingFast, V110> t10.ATA_KingFast_04032223A0274_ sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin pcib0 at pci0 dev 31 function 0 "Intel Q270 LPC" rev 0x00 "Intel 200 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x00: msi azalia0: codecs: Conexant/0x5098, Intel/0x2809, using Conexant/0x5098 audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 200 Series SMBus" rev 0x00: apic 2 int 16 iic0 at ichiic0 em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x00: msi, address 10:62:e5:0e:21:4e isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 efifb at mainbus0 not configured uhidev0 at uhub0 port 4 configuration 1 interface 0 "PixArt HP USB Optical Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 5 configuration 1 interface 0 "Unicomp Endura Pro Keyboard" rev 1.10/43.34 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhidev2 at uhub0 port 5 configuration 1 interface 1 "Unicomp Endura Pro Keyboard" rev 1.10/43.34 addr 3 uhidev2: iclass 3/1, 3 report ids ums1 at uhidev2 reportid 1: 3 buttons, Z dir wsmouse1 at ums1 mux 0 ucc0 at uhidev2 reportid 2: 573 usages, 20 keys, array wskbd2 at ucc0 mux 1 uhid0 at uhidev2 reportid 3: input=1, output=0, feature=0 umass0 at uhub0 port 18 configuration 1 interface 0 "Seagate Expansion" rev 3.00/7.07 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Seagate, Expansion, 0707> sd1: 953869MB, 512 bytes/sector, 1953525167 sectors vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (f91b6e82d152b80f.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] [ENCODER:94:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] [ENCODER:119:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation)
