Hi, I recently got a new motherboard with an alder lake CPU (i3-N305), which uses a JMicron JMB585 SATA multipler connect to one of the PCI-E lanes. Disk connected to this will get detected (albeit a bit slower as direct connected SATA disks)
(There is no serial console, waiting for a IP KVM switch. So all typed by hand and apologies for any typos) A number of devices are not configured (just in case that is relevant and only those that are still visible, there might be more): "Intel ADL-N eSPI" rev 0x00 at pci0 dev31 function 0 not configured "Intel ADL-N HD Audio" rev 0x00 at pci0 dev31 function 3 not configured "Intel ADL-N SMBus" rev 0x00 at pci0 dev31 function 4 not configured "Intel ADL-N SPI" rev 0x00 at pci0 dev31 function 5 not configured The system hangs when trying to determine if softraid is available (does not matter if disk are connected or not): softraid0 at root scsibus4 at softraid0: 256 targets > hanging forever after this The disks used are from my older system (also an AMD64 system based on an intel J3720 CPU) was used before, but no softraid was ever configured. The hanging occurs for both booting from the old disk and booting with a current snapshot miniroot75.img The system only supports USB and the connected keyboard does not work when trying to use 'boot -c' to see if I could disable softraid. Apart from building my own kernel anyhting I could do? BR/Rob PS. does this belong in bugs@ ?
